The BE6K system status LED is amber blinking

[chenchunbo]

Dear All,

My customer has installed an  BE6K , but now the BE6K system status LED is Amber blinking. From the UCS C220 document , the amber blinking LED means the server is in a critical fault state, for example, boot failed, fatal CPU and/or bus error, over-temperature condition.

But i checked the temperature status LED, it is green, and the VCS which installed in BE6K , it works normally. so it seems the BE6K is normal.

So do anybody know about this issue, and  how to troulbeshoot it?

[Aman Soi]

Hi,

you can login through CIMC to get more details for the cause.

regds,

aman

[chenchunbo]

We didn't configure CIMC when we installed BE6K, so we need to reboot it to configure, but I don't know whether it will affect the VCS installed in the BE6K when rebooting. 

[Aman Soi · Accepted solution]

you need to shut/power off the entire applications to configure CIMC and then, reboot UCS chassis

http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c200-m1-high-density-rack-mount-server/111455-setup-cimc-c-series.html

F8 to configure/view CIMC IP

regds,

aman

[chenchunbo]

OK, thank you very much!

[Aman Soi]

u are welcome.

regds,

aman

[rosaho]

This discussion has been reposted from Additional Communities to the Business Edition 6000 community.