11-14-2011 01:31 PM - edited 03-21-2019 04:56 AM
When an outside call is received on the UC320W and that same call is transferred to another outside number via an outbound trunk even after the call completes the outside trunks freeze and no one is able to use them until they are disconnected and reconnected to the UC320W. Can someone help with this issue?
11-14-2011 02:18 PM
Hi Rashid,
When you say the "trunk freezes" are you using FXO lines or SIP for you calls?
11-15-2011 06:03 PM
We are using FXO lines and they remain in use.They then need to be disconnected and then reconnected.
11-16-2011 07:43 AM
Hi,
It sounds like the UC320W is not seeing the CPC disconnect. Some partners have had some success in contacting their FXO provider and increasing the disconnect tone. See https://supportforums.cisco.com/message/3438357#3438357 The disconnect tone will depend upon your specific country.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide