cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1440
Views
0
Helpful
3
Replies

trunk-group on FXS ports: switch to next port if "no answere"

HOLGER HAHN
Beginner
Beginner

In one team of our company we have three fax machines which will be reached on four different extensions (175, 345, 375 and 385).

On a VG224 I've configured three FXS voice-ports and two dial-peers associating to a trunk-group:

trunk group PSC-Fax

hunt-scheme longest-idle


voice-port 2/0

trunk-group PSC-Fax

timeouts ringing 20


voice-port 2/1

trunk-group PSC-Fax

timeouts ringing 20


voice-port 2/2

trunk-group PSC-Fax

timeouts ringing 20


dial-peer voice 175 pots

trunkgroup PSC-Fax

destination-pattern 175

dial-peer voice 345 pots

trunkgroup PSC-Fax

destination-pattern3[478]5

It works fine!

But what if one fax machine doesn't answere?

Hunting should be go on to the next voice-port!

But it don't. After the ringing timer is expired the call will be disconnected.

How can I configure the gateway to achieve this?

3 Replies 3

Daniele Giordano
Collaborator
Collaborator

I'm not sure but try this in global configuration:

no voice hunt no-answer

That doesn't work because "voice hunt" commands are related to dialpeers.

And I want a hunting to the next voiceport within the trunk group...

HOLGER HAHN
Beginner
Beginner

In the meantime I opend a service request (616393915) with the result, that this is not possible with hunt group.

The gateway has to be controlled by a CallManager and than you can do it by a hunt pilot.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: