12-18-2013 06:16 AM - edited 03-21-2019 07:58 AM
Hi,
I have recently been setting up my 540, (this is in a home environment(UK)) but only have access to US English Pack, tried to download the UK pack but requires Service Contract.
How can a single person using CISCO kit at home to study etc get a service contract in order to get essential software etc.
Or are the service contracts too costly for a single person to get.
Any Ideas would be appreciated as the UC540 cost me a fair bit and don't want it to sit in a cupboard gathering dust.
Thanks in advance.
Solved! Go to Solution.
12-23-2013 08:53 PM
Make sure you are logged into the Cisco site, then go here:
https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=UC500
UC540 system with 8.6.2 Software Pack
12-18-2013 02:35 PM
Hello Derek,
You may contact Cisco partner in your area and get service contract for the UC.
Please find more information for Cisco partners in your area on the following link:
http://tools.cisco.com/WWChannels/LOCATR/openBasicSearch.do
HTH,
Alex
12-23-2013 08:53 PM
Make sure you are logged into the Cisco site, then go here:
https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=UC500
UC540 system with 8.6.2 Software Pack
01-02-2014 05:42 AM
Thanks for replies, I have finally managed to get the downloads required and UC540 now reloaded and updated.
Thank You Derek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide