UC 560 PSNT T1 configuration

[yency]

Hello

I have UC560 with 2 vic cards for 2 T1, and the configuration that I need is this:

The long distance call has to go for the First T1

Local calls for the second T1

and also I need a failover, If one of the T1 fails used the another one.

Any help please because I new on this platform.

Thanks

[nalbert]

Have you looked at Outgoing Dial plan in here

http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version3_2/administration_guide/cca_sbcs_admin_guide.pdf

[Mario Garcia]

You can use the priority within CCA for outgoing dial plan.

If you are EUC or higher you can do this within the dial peers themselves.

Sent from Cisco Technical Support iPhone App