11-28-2012 01:56 AM - edited 03-21-2019 06:39 AM
Yesterday I´ve installed a UC320W with 9x SPA303 and a SF200 switch.
The problem is that the phones didn´t get the POE and I was forced to use the transformers.
The POE in the SF200 is working because I also have a WAP121-E-K9 plugged in and working.
Best regards.
Solved! Go to Solution.
11-28-2012 03:19 AM
The SPA303 doesn't support POE, you'll need a POE splitter such as:
http://www.cisco.com/en/US/products/ps10044/index.html
Regards,
Paul.
11-28-2012 03:19 AM
The SPA303 doesn't support POE, you'll need a POE splitter such as:
http://www.cisco.com/en/US/products/ps10044/index.html
Regards,
Paul.
11-28-2012 05:30 AM
I thought as much, just needed a confirmation.
Thanks Paul.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide