I am opening a mid sized retail shop.
I have (2) 7970, (4) 7940, and (1) 7925.
I need 1 auto antendant menu (when call comes in via fxo line), 1 FXO Line for in/out bound calling, and 1 voice mailbox that sits on an extension.
Would it be possible to setup the uc520 just for handling phones, and use a cisco smb router for DHCP, WLAN, Firewall, etc?
Can my configuration all be done with the web gui, and CCA for the uc520?
I was looking at thee UC320W, however you cannot use any 7900 series phones, and I do not like how it handles user/phone assigment.
Solved! Go to Solution.
Please refer to document which compare it's specification between UC540 and UC560.
With latest softwarepack upgrade,
UC540 has capability for 8-32 users. (32 users are maximum)
UC560 has capability for 16-138 users (138 users are maximum)
If you are expecting growth up to 50 users, you should consider UC560.
I have UC560 with 80 users and UC540 with 8 users for multi site.
With recent 8.6.1 softwarepack update, system is running without any problem so far.