VPN ID settings on SPA-942

[Anna Wistedt]

Does anybodu know if its possible to configure VPN ID on SPA-942.

For example if the  customer has two separate VPN (VPN ID1 and VPN ID2) and wants his computer to  run over VPN ID2. Is it possile to configure the SPA-942 to communicate over VPN  ID1?

//Anna

[David Carr]

If you login to the phone, you can set it manually under the system tab.

System  Information DHCP: DHCP Current  IP: 192.168.1.101 Host Name: SipuraSPA Domain: linksys.com Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1 Primary  DNS: 4.2.2.2 Secondary  DNS: Product  Information Product Name: SPA-942 Serial Number: 4LO00G802325 Software Version: 6.1.5(a) Hardware Version: 1.0.2(4767) MAC Address: 000E08DF2887 Client Certificate: Installed Customization: Open Licenses: None Phone  Status Current Time: 6/3/2009 11:24:52 Elapsed Time: 00:01:05 Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0 Broadcast Pkts Recv: 10 Broadcast Bytes Recv: 792 Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0 RTP Packets Sent: 0 RTP Bytes Sent: 0 RTP Packets Recv: 0 RTP Bytes Recv: 0 SIP Messages Sent: 9 SIP Bytes Sent: 5584 SIP Messages Recv: 2 SIP Bytes Recv: 760 External IP: Operational VLAN ID: n/a Ext  1 Status Registration State: Registered Last Registration At: 6/3/2009 11:24:33 Next Registration In: 27 s Message Waiting: No Mapped SIP Port: Ext  2 Status Registration State: Not Registered Last Registration At: Next Registration In: Message Waiting: No Mapped SIP Port: Ext  3 Status Registration State: Not Registered Last Registration At: Next Registration In: Message Waiting: No Mapped SIP Port: Ext  4 Status Registration State: Not Registered Last Registration At: Next Registration In: Message Waiting: No Mapped SIP Port: Line  1 Call 1 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  1 Call 2 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  2 Call 1 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  2 Call 2 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  3 Call 1 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  3 Call 2 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  4 Call 1 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Line  4 Call 2 Status Call State: Idle Tone: None Encoder: Decoder: Type: Remote  Hold: Callback: Peer Name: Peer Phone: Duration: Packets Sent: Packets Recv: Bytes Sent: Bytes Recv: Decode Latency: Jitter: Round Trip Delay: Packets Lost: Packet Error: Mapped RTP Port: Media Loopback: Downloaded  Ring Tone Status: Idle Ring Tone 1: Not Installed Ring Tone 2: Not Installed System  Configuration Restricted Access Domains: Enable Web Server: yesno Web Server Port: Enable Web Admin Access: yesno Admin Passwd: User Password: Internet  Connection Type Connection Type: DHCPStatic IPPPPOE Static IP Settings Static IP: NetMask: Gateway: PPPoE Settings PPPoE Login Name: PPPoE  Login Password: PPPoE Service Name: Optional  Network Configuration HostName: Domain: Primary DNS: Secondary  DNS: DNS Server Order: ManualManual,DHCPDHCP,Manual DNS  Query Mode: ParallelSequential Syslog Server: Debug  Server: Debug Level: 0123 Primary  NTP Server: Secondary NTP Server: VLAN  Settings Enable VLAN: yesno Enable CDP: yesno VLAN ID: PC  Port VLAN Highest Priority: 01234567No Limit Enable PC Port VLAN Tagging: yesno PC Port VLAN  ID: SIP  Parameters Max Forward: Max  Redirection: Max Auth: SIP  User Agent Name: SIP Server Name: SIP  Reg User Agent Name: SIP Accept Language: DTMF  Relay MIME Type: Remove Last Reg: yesno Use Compact  Header: yesno Escape Display Name: yesno SIP-B Enable: yesno Talk Package: yesno Hold Package: yesno Conference Package: yesno Notify  Conference: yesno RFC 2543 Call Hold: yesno Random REG CID On Reboot: yesno Mark All AVT Packets: yesno SIP TCP Port Min: SIP TCP Port Max: CTI  Enable: yesno Caller ID Header: PAID-RPID-FROMPAID-FROMRPID-PAID-FROMRPID-FROMFROM SRTP Method: x-sipuras-descriptor Hold Target Before REFER: yesno SIP  Timer Values (sec) SIP T1: SIP  T2: SIP T4: SIP  Timer B: SIP Timer F: SIP  Timer H: SIP Timer D: SIP  Timer J: INVITE Expires: ReINVITE  Expires: Reg Min Expires: Reg  Max Expires: Reg Retry Intvl: Reg  Retry Long Intvl: Reg Retry Random Delay: Reg  Retry Long Random Delay: Reg Retry Intvl Cap: Sub  Min Expires: Sub Max Expires: Sub  Retry Intvl: Response  Status Code Handling SIT1 RSC: SIT2  RSC: SIT3 RSC: SIT4  RSC: Try Backup RSC: Retry  Reg RSC: RTP  Parameters RTP Port Min: RTP  Port Max: RTP Packet Size: Max  RTP ICMP Err: RTCP Tx Interval: No  UDP Checksum: yesno Symmetric RTP: yesno Stats In BYE: yesno SDP  Payload Types AVT Dynamic Payload: INFOREQ  Dynamic Payload: G726r16 Dynamic Payload: G726r24  Dynamic Payload: G726r32 Dynamic Payload: G726r40  Dynamic Payload: G729b Dynamic Payload: EncapRTP  Dynamic Payload: RTP-Start-Loopback Dynamic Payload: RTP-Start-Loopback  Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 AVT Codec Name: G711u Codec Name: G711a Codec Name: G726r16  Codec Name: G726r24 Codec Name: G726r32  Codec Name: G726r40 Codec Name: G729a  Codec Name: G729b Codec Name: G723  Codec Name: EncapRTP Codec Name: NAT  Support Parameters Handle VIA received: yesno Handle VIA  rport: yesno Insert VIA received: yesno Insert VIA  rport: yesno Substitute VIA Addr: yesno Send Resp To  Src Port: yesno STUN Enable: yesno STUN Test  Enable: yesno STUN Server: EXT  IP: EXT RTP Port Min: NAT  Keep Alive Intvl: Linksys  Key System Parameters Linksys Key System: yesno Multicast Address: Force LAN Codec: noneG711uG711a Configuration  Profile Provision Enable: yesno Resync On Reset: yesno Resync Random Delay: Resync  Periodic: Resync Error Retry Delay: Forced  Resync Delay: Resync From SIP: yesno Resync After Upgrade Attempt: yesno Resync Trigger 1: Resync Trigger 2: Resync Fails On FNF: yesno Profile Rule: Profile Rule B: Profile Rule C: Profile Rule D: Log Resync Request Msg: Log Resync Success Msg: Log Resync Failure Msg: Report Rule: User Configurable Resync: yesno Firmware  Upgrade Upgrade Enable: yesno Upgrade Error Retry Delay: Downgrade Rev Limit: Upgrade Rule: Log Upgrade Request Msg: Log Upgrade Success Msg: Log Upgrade Failure Msg: License Keys: General  Purpose Parameters GPP A: GPP B: GPP C: GPP D: GPP E: GPP F: GPP G: GPP H: GPP I: GPP J: GPP K: GPP L: GPP M: GPP N: GPP O: GPP P: Call  Progress Tones Dial Tone: Outside Dial Tone: Prompt Tone: Busy Tone: Reorder Tone: Off Hook Warning Tone: Ring Back Tone: Call Waiting Tone: Confirm Tone: SIT1 Tone: SIT2 Tone: SIT3 Tone: SIT4 Tone: MWI Dial Tone: Cfwd Dial Tone: Holding Tone: Conference Tone: Secure Call Indication Tone: Page Tone: Alert Tone: Distinctive  Ring Patterns Cadence 1: Cadence  2: Cadence 3: Cadence 4: Cadence 5: Cadence 6: Cadence 7: Cadence  8: Cadence 9: Control  Timer Values (sec) Reorder Delay: Call  Back Expires: Call Back Retry Intvl: Call  Back Delay: Interdigit Long Timer: Interdigit  Short Timer: Vertical  Service Activation Codes Call Return Code: Blind  Transfer Code: Call Back Act Code: Call  Back Deact Code: Cfwd All Act Code: Cfwd  All Deact Code: Cfwd Busy Act Code: Cfwd  Busy Deact Code: Cfwd No Ans Act Code: Cfwd  No Ans Deact Code: CW Act Code: CW  Deact Code: CW Per Call Act Code: CW  Per Call Deact Code: Block CID Act Code: Block  CID Deact Code: Block CID Per Call Act Code: Block  CID Per Call Deact Code: Block ANC Act Code: Block  ANC Deact Code: DND Act Code: DND  Deact Code: Secure All Call Act Code: Secure  No Call Act Code: Secure One Call Act Code: Secure  One Call Deact Code: Paging Code: Call  Park Code: Call Pickup Code: Call  UnPark Code: Group Call Pickup Code: Media  Loopback Code: Referral Services Codes: Feature Dial Services Codes: Vertical  Service Announcement Codes Service Annc Base Number: Service Annc Extension Codes: Outbound  Call Codec Selection Codes Prefer G711u Code: Force  G711u Code: Prefer G711a Code: Force  G711a Code: Prefer G723 Code: Force  G723 Code: Prefer G726r16 Code: Force  G726r16 Code: Prefer G726r24 Code: Force  G726r24 Code: Prefer G726r32 Code: Force  G726r32 Code: Prefer G726r40 Code: Force  G726r40 Code: Prefer G729a Code: Force  G729a Code: Miscellaneous Set Local Date (mm/dd): Set  Local Time (HH/mm): Time Zone: GMT-12:00GMT-11:00GMT-10:00GMT-09:00GMT-08:00GMT-07:00GMT-06:00GMT-05:00GMT-04:00GMT-03:30GMT-03:00GMT-02:00GMT-01:00GMTGMT+01:00GMT+02:00GMT+03:00GMT+03:30GMT+04:00GMT+05:00GMT+05:30GMT+05:45GMT+06:00GMT+06:30GMT+07:00GMT+08:00GMT+09:00GMT+09:30GMT+10:00GMT+11:00GMT+12:00GMT+13:00 Time  Offset (HH/mm): Daylight Saving Time Rule: Daylight Saving Time Enable: yesno DTMF Playback Level: DTMF Playback Length: Inband  DTMF Boost: 0dB3dB6dB9dB12dB15dB18dB Dictionary Server Script: Language Selection: Default  Character Encoding: ISO-8859-1UTF-8 General Station Name: Voice Mail Number: Text Logo: BMP Picture Download URL: Select Logo: DefaultBMP PictureText  LogoNone Select  Background Picture: NoneBMP PictureText Logo Screen Saver Enable: yesno Screen Saver  Wait: Screen Saver Icon: StationTimeLockPhoneDateTimeBackground Picture Line  Key 1 Extension: 1234Disabled Short Name: Share Call Appearance: privateshared Extended Function: Line  Key 2 Extension: 1234Disabled Short Name: Share Call Appearance: privateshared Extended Function: Line  Key 3 Extension: 1234Disabled Short Name: Share Call Appearance: privateshared Extended Function: Line  Key 4 Extension: 1234Disabled Short Name: Share Call Appearance: privateshared Extended Function: Line  Key Extended Function Subscribe Expires: Subscribe  Retry Interval: Subscribe Delay: Server  Type: BroadsoftSPA9000AsteriskRFC3265_4235Sylantro SPA932 Call Pickup Code: Miscellaneous  Line Key Settings SCA Line ID Mapping: Horizontal  FirstVertical  First SCA Barge-In Enable: yesno Line  Key LED Pattern Idle LED: Remote  Undefined LED: Local Seized LED: Remote  Seized LED: Local Progressing LED: Remote  Progressing LED: Local Ringing LED: Remote  Ringing LED: Local Active LED: Remote  Active LED: Local Held LED: Remote  Held LED: Register Failed LED: Disabled  LED: Registering LED: Call  Back Active LED: Supplementary  Services Conference Serv: yesno Attn Transfer Serv: yesno Blind Transfer Serv: yesno DND Serv: yesno Block ANC Serv: yesno Call Back Serv: yesno Block CID Serv: yesno Secure Call Serv: yesno Cfwd All Serv: yesno Cfwd Busy Serv: yesno Cfwd No Ans Serv: yesno Paging Serv: yesno Call Park Serv: yesno Call Pick Up Serv: yesno ACD Login Serv: yesno Group Call  Pick Up Serv: yesno ACD Ext: 1234 Service  Annc Serv: yesno Ring  Tone Ring1: Ring2: Ring3: Ring4: Ring5: Ring6: Ring7: Ring8: Ring9: Ring10: Audio  Input Gain (dB) Handset Input Gain: -606 Headset  Input Gain: -606 Speakerphone Input Gain: -606 Handset  Additional Input Gain: -3-2-10123 Headset Additional Input Gain: -3-2-10123 Speakerphone  Additional Input Gain: -3-2-10123 LDAP  Corporate Directory Search LDAP Dir Enable: yesno LDAP Corp Dir  Name: LDAP Server: LDAP  Auth Method: NoneSimpleDIGEST-MD5 LDAP Client DN: LDAP Username: LDAP  Password: LDAP Search Base: LDAP Last Name Filter: LDAP  First Name Filter: LDAP Search Item 3: LDAP  Item 3 Filter: LDAP Search Item 4: LDAP  item 4 Filter: LDAP Display Attrs: LDAP Number Mapping: Extension  Mobility EM Enable: yesno EM User  Domain: General Line Enable: yesno Share  Line Appearance Share Ext: privateshared Shared User ID: Subscription Expires: NAT  Settings NAT Mapping Enable: yesno NAT Keep  Alive Enable: yesno NAT Keep Alive Msg: NAT  Keep Alive Dest: Network  Settings SIP TOS/DiffServ Value: SIP  CoS Value: 01234567 RTP TOS/DiffServ Value: RTP  CoS Value: 01234567 Network Jitter Level: lowmediumhighvery highextremely  high Jitter Buffer Adjustment: up and downup onlydown onlydisable SIP  Settings SIP Transport: UDPTCPTLS SIP  Port: SIP 100REL Enable: yesno EXT SIP Port: Auth Resync-Reboot: yesno SIP Proxy-Require: SIP Remote-Party-ID: yesno Referor Bye Delay: Refer-To Target Contact: yesno Referee Bye  Delay: SIP Debug Option: none1-line1-line  excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG Refer  Target Bye Delay: Sticky 183: yesno Auth INVITE: yesno Ntfy Refer On 1xx-To-Inv: yesno Use Anonymous With RPID: yesno Set G729 annexb: nonenoyesfollow silence supp setting Call  Feature Settings Blind Attn-Xfer Enable: yesno MOH Server: Message Waiting: yesno Auth Page: yesno Default Ring: No Ring12345678910User 1User 2 Auth  Page Realm: Conference Bridge URL: Auth  Page Password: Mailbox ID: Voice  Mail Server: State Agent: CFWD  Notify Serv: yesno CFWD Notifier: Proxy  and Registration Proxy: Use  Outbound Proxy: yesno Outbound Proxy: Use  OB Proxy In Dialog: yesno Register: yesno Make Call Without Reg: yesno Register Expires: Ans  Call Without Reg: yesno Use DNS SRV: yesno DNS SRV Auto  Prefix: yesno Proxy Fallback Intvl: Proxy  Redundancy Method: NormalBased on SRV Port Subscriber  Information Display Name: User  ID: Password: Use  Auth ID: yesno Auth ID: Mini Certificate: SRTP Private Key: Audio  Configuration Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Use Pref Codec Only: yesno Second Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 Third Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 G729a Enable: yesno G723 Enable: yesno G726-16 Enable: yesno G726-24 Enable: yesno G726-32 Enable: yesno G726-40 Enable: yesno Release Unused Codec: yesno DTMF Process AVT: yesno Silence Supp Enable: yesno DTMF Tx  Method: InBandAVTINFOAutoInBand+INFOAVT+INFO Dial  Plan Dial Plan: Caller ID Map: Enable IP Dialing: yesno Emergency Number: General Line Enable: yesno Share  Line Appearance Share Ext: privateshared Shared User ID: Subscription Expires: NAT  Settings NAT Mapping Enable: yesno NAT Keep  Alive Enable: yesno NAT Keep Alive Msg: NAT  Keep Alive Dest: Network  Settings SIP TOS/DiffServ Value: SIP  CoS Value: 01234567 RTP TOS/DiffServ Value: RTP  CoS Value: 01234567 Network Jitter Level: lowmediumhighvery highextremely  high Jitter Buffer Adjustment: up and downup onlydown onlydisable SIP  Settings SIP Transport: UDPTCPTLS SIP  Port: SIP 100REL Enable: yesno EXT SIP Port: Auth Resync-Reboot: yesno SIP Proxy-Require: SIP Remote-Party-ID: yesno Referor Bye  Delay: Refer-To Target Contact: yesno Referee Bye  Delay: SIP Debug Option: none1-line1-line  excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG Refer  Target Bye Delay: Sticky 183: yesno Auth INVITE: yesno Ntfy Refer On 1xx-To-Inv: yesno Use Anonymous With RPID: yesno Set G729 annexb: nonenoyesfollow silence supp setting Call  Feature Settings Blind Attn-Xfer Enable: yesno MOH Server: Message Waiting: yesno Auth Page: yesno Default Ring: No Ring12345678910User 1User 2 Auth  Page Realm: Conference Bridge URL: Auth  Page Password: Mailbox ID: Voice  Mail Server: State Agent: CFWD  Notify Serv: yesno CFWD Notifier: Proxy  and Registration Proxy: Use Outbound  Proxy: yesno Outbound Proxy: Use  OB Proxy In Dialog: yesno Register: yesno Make Call Without Reg: yesno Register Expires: Ans  Call Without Reg: yesno Use DNS SRV: yesno DNS SRV Auto  Prefix: yesno Proxy Fallback Intvl: Proxy  Redundancy Method: NormalBased on SRV Port Subscriber  Information Display Name: User  ID: Password: Use  Auth ID: yesno Auth ID: Mini Certificate: SRTP Private Key: Audio  Configuration Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Use Pref Codec Only: yesno Second Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 Third Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 G729a Enable: yesno G723 Enable: yesno G726-16 Enable: yesno G726-24 Enable: yesno G726-32 Enable: yesno G726-40 Enable: yesno Release Unused Codec: yesno DTMF Process AVT: yesno Silence Supp Enable: yesno DTMF Tx  Method: InBandAVTINFOAutoInBand+INFOAVT+INFO Dial  Plan Dial Plan: Caller ID Map: Enable IP Dialing: yesno Emergency Number: General Line Enable: yesno Share  Line Appearance Share Ext: privateshared Shared User ID: Subscription Expires: NAT  Settings NAT Mapping Enable: yesno NAT Keep  Alive Enable: yesno NAT Keep Alive Msg: NAT  Keep Alive Dest: Network  Settings SIP TOS/DiffServ Value: SIP  CoS Value: 01234567 RTP TOS/DiffServ Value: RTP  CoS Value: 01234567 Network Jitter Level: lowmediumhighvery highextremely  high Jitter Buffer Adjustment: up and downup onlydown onlydisable SIP  Settings SIP Transport: UDPTCPTLS SIP  Port: SIP 100REL Enable: yesno EXT SIP Port: Auth Resync-Reboot: yesno SIP Proxy-Require: SIP Remote-Party-ID: yesno Referor Bye  Delay: Refer-To Target Contact: yesno Referee Bye  Delay: SIP Debug Option: none1-line1-line  excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG Refer  Target Bye Delay: Sticky 183: yesno Auth INVITE: yesno Ntfy Refer On 1xx-To-Inv: yesno Use Anonymous With RPID: yesno Set G729 annexb: nonenoyesfollow silence supp setting Call  Feature Settings Blind Attn-Xfer Enable: yesno MOH Server: Message Waiting: yesno Auth Page: yesno Default Ring: No Ring12345678910User 1User 2 Auth  Page Realm: Conference Bridge URL: Auth  Page Password: Mailbox ID: Voice  Mail Server: State Agent: CFWD  Notify Serv: yesno CFWD Notifier: Proxy  and Registration Proxy: Use Outbound  Proxy: yesno Outbound Proxy: Use  OB Proxy In Dialog: yesno Register: yesno Make Call Without Reg: yesno Register Expires: Ans  Call Without Reg: yesno Use DNS SRV: yesno DNS SRV Auto  Prefix: yesno Proxy Fallback Intvl: Proxy  Redundancy Method: NormalBased on SRV Port Subscriber  Information Display Name: User  ID: Password: Use  Auth ID: yesno Auth ID: Mini Certificate: SRTP Private Key: Audio  Configuration Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Use Pref Codec Only: yesno Second Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 Third Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 G729a Enable: yesno G723 Enable: yesno G726-16 Enable: yesno G726-24 Enable: yesno G726-32 Enable: yesno G726-40 Enable: yesno Release Unused Codec: yesno DTMF Process AVT: yesno Silence Supp Enable: yesno DTMF Tx  Method: InBandAVTINFOAutoInBand+INFOAVT+INFO Dial  Plan Dial Plan: Caller ID Map: Enable IP Dialing: yesno Emergency Number: General Line Enable: yesno Share  Line Appearance Share Ext: privateshared Shared User ID: Subscription Expires: NAT  Settings NAT Mapping Enable: yesno NAT Keep  Alive Enable: yesno NAT Keep Alive Msg: NAT  Keep Alive Dest: Network  Settings SIP TOS/DiffServ Value: SIP  CoS Value: 01234567 RTP TOS/DiffServ Value: RTP  CoS Value: 01234567 Network Jitter Level: lowmediumhighvery highextremely  high Jitter Buffer Adjustment: up and downup onlydown onlydisable SIP  Settings SIP Transport: UDPTCPTLS SIP  Port: SIP 100REL Enable: yesno EXT SIP Port: Auth Resync-Reboot: yesno SIP Proxy-Require: SIP Remote-Party-ID: yesno Referor Bye  Delay: Refer-To Target Contact: yesno Referee Bye  Delay: SIP Debug Option: none1-line1-line  excl. OPT1-line excl. NTFY1-line excl. REG1-line excl. OPT|NTFY|REGfullfull excl. OPTfull excl. NTFYfull excl. REGfull excl. OPT|NTFY|REG Refer  Target Bye Delay: Sticky 183: yesno Auth INVITE: yesno Ntfy Refer On 1xx-To-Inv: yesno Use Anonymous With RPID: yesno Set G729 annexb: nonenoyesfollow silence supp setting Call  Feature Settings Blind Attn-Xfer Enable: yesno MOH Server: Message Waiting: yesno Auth Page: yesno Default Ring: No Ring12345678910User 1User 2 Auth  Page Realm: Conference Bridge URL: Auth  Page Password: Mailbox ID: Voice  Mail Server: State Agent: CFWD  Notify Serv: yesno CFWD Notifier: Proxy  and Registration Proxy: Use Outbound  Proxy: yesno Outbound Proxy: Use  OB Proxy In Dialog: yesno Register: yesno Make Call Without Reg: yesno Register Expires: Ans  Call Without Reg: yesno Use DNS SRV: yesno DNS SRV Auto  Prefix: yesno Proxy Fallback Intvl: Proxy  Redundancy Method: NormalBased on SRV Port Subscriber  Information Display Name: User  ID: Password: Use  Auth ID: yesno Auth ID: Mini Certificate: SRTP Private Key: Audio  Configuration Preferred Codec: G711uG711aG726-16G726-24G726-32G726-40G729aG723 Use Pref Codec Only: yesno Second Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 Third Preferred Codec: UnspecifiedG711uG711aG726-16G726-24G726-32G726-40G729aG723 G729a Enable: yesno G723 Enable: yesno G726-16 Enable: yesno G726-24 Enable: yesno G726-32 Enable: yesno G726-40 Enable: yesno Release Unused Codec: yesno DTMF Process AVT: yesno Silence Supp Enable: yesno DTMF Tx  Method: InBandAVTINFOAutoInBand+INFOAVT+INFO Dial  Plan Dial Plan: Caller ID Map: Enable IP Dialing: yesno Emergency Number: Call  Forward Cfwd All Dest: Cfwd  Busy Dest: Cfwd No Ans Dest: Cfwd  No Ans Delay: Speed  Dial Speed Dial 2: Speed  Dial 3: Speed Dial 4: Speed  Dial 5: Speed Dial 6: Speed  Dial 7: Speed Dial 8: Speed  Dial 9: Supplementary  Services CW Setting: yesno Block CID Setting: yesno Block ANC Setting: yesno DND Setting: yesno Secure Call Setting: yesno Dial  Assistance: yesno Auto Answer Page: yesno Preferred Audio Device: SpeakerHeadset Send Audio To Speaker: yesno Time Format: 12hr24hr Date Format: month/dayday/month Miss Call  Shortcut: yesno Accept Media Loopback Request: neverautomaticmanual Media Loopback Mode: sourcemirror Media Loopback Type: mediapacket Text Message: yesno Text Message From 3rd Party: yesno Alert Tone  Off: yesno Log Missed Calls for EXT 1: yesno Log Missed Calls for EXT 2: yesno Log Missed Calls for EXT 3: yesno Log Missed Calls for EXT 4: yesno Audio  Volume Ringer Volume: Speaker  Volume: Handset Volume: Headset  Volume: LCD Contrast: Back  Light Timer: Off10 s20 s30 sAlways On

[Anna Wistedt]

I do not have the PC-port parameters on my SPA. Do I have an old firmware maybe? We currently run on 5.2.8.

The only VLAN-settings I can change are Enable VLAN, VLAN ID and Enable CDP

[Anna Wistedt]

Works fine now after firmwareupgrade