cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

746
Views
0
Helpful
1
Replies
Highlighted
Beginner

(1) UC560 and E911 with (2) companies

If I have (2) Customers in separate buildings (Same parent company) that will be tied together via a fiber connection.  Can I somehow use (1) US560 and somehow support them both if someone in the remote building dials 911?  Is there a Tenant function that would work to direct those calls out a specific extension which would have to be designated as the remote address?

Everyone's tags (4)
1 REPLY 1
Highlighted

Re: (1) UC560 and E911 with (2) companies

One way to do this would be to map 911 calls from the remote location phones to a particular outbound port. You would then setup the location information for this phone line to match the address of the remote office. See the following link for how to accomplish the port mapping.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Hope this helps.

Brandon