2 way Paging UC500

[cachorropr]

K12 school is upgrading the PBX and we are implementing UC500 series for 30 endpoints. School also has 30 2 way legacy intercom system that they want to integrate with the PBX. Since UC500 doesnt support SIP, anybody know of a 3rd party that would do this? I cant do it with FXS ports since there are so many 2 way intercoms and it would be nice to do it SIP based.

I could go with BE6000 or CME but the price difference would scare away this customer.

Any ideas?

[paolo bevilacqua]

UC500 perfectly supports SIP, you just have to configure it.

[cachorropr]

I was under the impression that UC500 could only use SCCP endpoints and SIP was just supported for trunking. Has anybody used the Cyberdata/Valcom 2 way intercom units with UC500?

[paolo bevilacqua]

Trunk or endpoint, anything SIP works.

Thank you for the nice rating and good luck!      

[cachorropr]

Thanks for reply, I'll try it out.