cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
605
Views
0
Helpful
5
Replies
Highlighted
Beginner

525G won't get configuration on UC560

Help, please.

I've just deployed a UC560 with SPA502's and 525g's, the 502 are registering fine and getting the correct ip address.  The 525's are also getting the correct ip address, however they are not getting any configuration.  I've checked and rechecked all that I know that may be causing this.  Anyone able to point me in the right direction?

5 REPLIES 5
Highlighted
Beginner

What software pack is on the UC?  It's possible that it's running an older version of IOS that didn't support the 525.

Highlighted

Ver. 15.0

Highlighted
Cisco Employee

Are the phones SPA525G or SPA525G2?  Most likely the IOS version of the UC560 must be updated to provide the correct phone model support.  If you install the CCA version 3.2(1) it should update the UC560 to the correct IOS version.

Starting point.

Randy

Highlighted

The phones are 525G.

software ver 15.0(1R)XA3

Highlighted

Did loading CCA 3.2(1) and updating the IOS version resolve your issue?

I believe this requires a valid CCO account to download.

Randy