cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

659
Views
0
Helpful
3
Replies
Beginner

6961 display light timer UC540

Is there a way to configure the timer for the light of the display of a 6961?

I'm using a UC540, with version 8.6.0, the phone firmware load is SCCP 9.1.1.2.sr (which is the one that comes with the 8.6.0 pack).

On the SPA500's there is a config option to set the timer to 10, 20, 30 seconds, or allways on/off. Ont e 6961, there is only a contrast option for the display; no options for timer.

I couldn't find any hints on the users guide of the phone.

Also, I applied th Mexican Spanish locale pack, and only o few of the menus diaply in spanich. The rest is in English.

Thanks for the help!

Pedro.

Everyone's tags (6)
3 REPLIES 3
Highlighted
Hall of Fame Master

6961 display light timer UC540

Not all the phones have the same setting or features.

Same as for language translation, you can only ask and hope that Cisco fixes it some day.

Highlighted
Beginner

6961 display light timer UC540

Opened an SR #623415227

Here's the solution to modifying the backlight parameters:

Router(config-telephony)# service phone daysBacklightNotActive 1,2,3,4,5,6,7

Router(config-telephony)# service phone backlightOnTime 07:30

Router(config-telephony)# service phone backlightOnDuration 10:00

Router(config-telephony)# service phone backlightIdleTimeout 00.01

These will configure the phones for a 1 minute timeout when idle. It seems that the rest of the parameters are superseeded by the last one, but need to have values anyway.

Following are some more links that further documento the issue.

https://supportforums.cisco.com/thread/2102986

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html#wp1083963

Thanks to Petko Kostov!

Highlighted
Beginner

6961 display light timer UC540

Just to complete the case, I missed a couple of commands, very useful for newbies (like me)...

Router# conf t

Router(config)# telephony service

Router(config-telephony)# service phone daysBacklightNotActive 1,2,3,4,5,6,7

Router(config-telephony)# service phone backlightOnTime 07:30

Router(config-telephony)# service phone backlightOnDuration 10:00

Router(config-telephony)# service phone backlightIdleTimeout 00:01

Router(config-telephony)# no create cnf-files

Router(config-telephony)# create cnf-files