Active Directory auth for VPN users in UC560

[michael.lorincz]

Hello,

Please excuse my ignorance, I'm not very familiar with AD. As far as I can tell UC500 is unable to integrate with AD for user information/numbers however the customer is curious if VPN users can be autherized via AD. Any info I can pass along would be great.

Regards,

Mike

[greenturtlesteak · Accepted solution]

While this is not supported by CCA it is possible to achieve this behavior with CLI.

Please refer to the following links for guidance

https://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949ba.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094700.shtml#installrad

Cole

[michael.lorincz]

Thanks!