cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
669
Views
5
Helpful
4
Replies
Beginner

Adding 1 to all outgoing calls

I have recently set up a new SIP provider on a UC560 that requires all numbers be 11-digit numbers starting with a 1. Is there any good way to have an outgoing dial-peer to translate all numbers dialed without 1 to add a 1 and the same time if someone does add a 1 a to the number they are dialing that system will treat it normally?

4 REPLIES 4
Participant

Re: Adding 1 to all outgoing calls

Via CLI you can in the dial-peer to prefix a 1

Sent from Cisco Technical Support iPhone App

Highlighted
Beginner

Re: Adding 1 to all outgoing calls

Do you mind providing an example? Even sudo-code would be appreciated.

Participant

Re: Adding 1 to all outgoing calls

Basically gain access via CLI

Located the dial-peer, commands as follows when in enable mode

Conf t

Dial-peer voice XX pots

Prefix 1

End

"XX" is the dial peer number you want to edit.

Let me know if you need additional commands

-Mario

Sent from Cisco Technical Support iPhone App

Beginner

Re: Adding 1 to all outgoing calls

That's perfect. Thank you very much.

Sent from my iPhone