We are looking to upgrade our SPA508G firmware in the lab from 7.5.2b to the latest 7.5.4
I know you are supposed to be able to drag and drop the bin file to the UC in topology view in CCA, but that only works in Window s XP.
We dont have an XP systems around, and I would like to know if there is a way of doing it without having to get and XP machine or install XP Mode.
Any suggestions welcome
Solved! Go to Solution.
You can always do it manually --
1. Upload phone firmware image to proper folder in flash. (Can be done via tftp/ftp or using the file manager in CCA)
2. Add appropriate "tftp-server" lines in config so the file can be found on the tftp server.
3. Update the "load 508G X" line in telephony-service.
4. Restart phones.
Please rate useful posts.
the TFTP Line is
tftp-server flash:/phones/50x-30x/spa50x-30x-7-5-4.bin alias spa50x-30x-7-5-4
and the load is
load 501G spa50x-30x-7-5-4
load 502G spa50x-30x-7-5-4
load 504G spa50x-30x-7-5-4
load 508G spa50x-30x-7-5-4
load 509G spa50x-30x-7-5-4
Which is how the origianl load was and TFTP was written.
TFTP debug is showing
000528: Apr 15 14:23:23.745: TFTP: Looking for spa50x-30x-7-5-4.BIN
and in the flash