cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3073
Views
5
Helpful
5
Replies

app_faxmail_onramp.2.0.1.3.tcl

rwshaheen
Level 1
Level 1

I have a customer that I need to configure fax-to-email for on a UC540.  Everything I have read on the forum and at UC500.com states that you need the following app to get the fax-to-email inbound/outbound service working but that is for UC520 devices.  The app is app_faxmail_onramp.2.0.1.3.tcl but when I go to download it it is no longer there.

I have two questions.  1) Will fax-to-email configurations for the UC520 be the same for the UC540?  2) Where can I download app_faxmail_onramp.2.0.1.3.tcl

Thanks!

                                 

5 Replies 5

The commands should be the same for UC540. You can use the following document as a reference to configure from start to finish:

https://supportforums.cisco.com/docs/DOC-9718

Thanks,


Marcos

Marcos,

That is the document I was looking for.  Thank you.  However, when I follow this link http://www.cisco.com/cgi-bin/tablebuild.pl/tclware to download the application it takes me to a page that displays the information below.  Please advise.

Software Download

Cisco Tool  Command Language Software

NOTE:
There are currently no files for  this type.

Hi Marcos,

I have tried the link that you have to download app_faxmail_onramp.2.0.1.3.tcl but it does not work. Could please provide a link where I can download the file.

Thank you,

Mark

Enter app_faxmail_onramp on cisco.com search box.

Click first result.

Note, you need a valid support contract to download.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: