Assigning outbound lines

[james.brittain]

Hi all,

Im coming to the end of the setup of our UC320w/ spa504G system and having one remaining problem.

Iv successfully setup and assigned inbound lines 5 from sip trunk and 1 from a fxo line.

For reference our 5 in bound sip lines end in 95/96/97/98/99

But all phones start calling outbound on 95 then work up when the lines are busy.

Is it possible to assign each phone its own outbound line?

Cheers in advanced.

[fscharz]

Hello James,

you can select different outbound trunks but I am not aware of the option to assign to each its own outbound line.

Below is an example how you can select seperate outside lines in the attachment.

Regards,

Friedrich