04-14-2010 07:27 AM - edited 03-21-2019 02:26 AM
Hi,
I want to figure out, if barge is possible to use with SPA52x phones.
I know that for cBarge Octo Line is a prerequisite. Barge on Shared Lines seems to work only on SIP phones.
Is the correct conclusion, that barge is not available on SPA52x phones?
regards,
Alfred
Solved! Go to Solution.
05-21-2010 06:56 AM
The SPA5xx series phones only support dual line is the issue. So thats a phone HW limitation.
04-16-2010 12:47 PM
SPA5XX phones do not support octo-lines.
Thanks,
Marcos
04-19-2010 02:54 AM
Hi Marcos,
In other words: no barge feature fpr SPA5xx Phones.
Correct?!
05-20-2010 10:10 AM
I would say correct, but am confirming to be sure.
05-21-2010 06:41 AM
Hi Steve,
Do you have some infos, if this feature will come in a future phone-load release? Or is this restriction due to the SPCP protocol?
kind regards,
Alfred
05-21-2010 06:56 AM
The SPA5xx series phones only support dual line is the issue. So thats a phone HW limitation.
05-21-2010 07:01 AM
thanks Steve
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: