Hi,Can anybody tell me if this model has a calling group featured supported, please?. I need to talk to more than two people at a conference room alike.Best,
Hi to all,I am new to this field, I may not be technically precise but I will try to explain the issues I encountered.I bought a second hand UC540 (fxo), which I have upgraded to the latest firmware 8.6. When I connect the router to the PC, The conn...
HiJust purchased,setup a new spa112 . Unit is working ,however I'm at odds to figure out where/how to get the phone to stop flashing it has a vmail but iit does'nt have any. I can call my number and it leaves a vmail, I can delete it after but the me...
HiThe user is claiming the transfer is not working - sometimes. The backend is asterisk, and the logs are simply showing hangup.I believe I have an 'Organic Interface Issue'What I want to know is if I can setup debug/syslog to track the keys that ar...
I have a conundrum. I have a main extension that is set to the Auto Attendant but I would like to have the Office Admin to be able to trap the call if he can before the call transfers to the Auto Attendant.The Auto Attendant is on a hunt group 1 and...
Hello, I need to use pstn line from another building connected to the first one by a radio link. I have a SPA3102 connected to PSTN line and PAP2T in the other building. the configuration I made is the following: On the SPA3102 PSTN Line Tab:PSTN-To-...
Has anybody ever configured a SPA112 to a Draytek 2820IPPX.I want to use a SPA112 to activate a DTMF door entry system through a Draytek 2820IPPX telephone system using a SIP / EXT on the phone systemSo any tips or if you have a copy of a configurati...
Hi There Hope you can help. I have the above system for our small business. We are in the building industry and we find a lot of clients hang up before leaving a message as they want a response there and then. Often I just miss the call or it diverts...
My call display suddenly stopped working, just showing "Incoming call".I'm trying to upgrade the firmware current 1.0.2 (006) to see if it resolve the issue.I downloaded the latest firm ware no problem.I logged into the "Phone Adapter Configuration U...
We have a UC540 with the FXS analog inputs configured as user phones. We call a call blast group setup for pilot # 8000.When the door stations go off hook the line rings but does not hit the 8000 blast group.Where is do you program the number to dia...
I have a SPA122 and I've read from a user on another forum that he set up a dial plan such that it will use a different provider depending on the number used.I have two VoIP services, one for local calls and another for international calls (voip.ms) ...
Hello,i have a problem, im getting Request failed on my SPA508G / FW 7.5.4 / test.xml<?xml version="1.0" encoding="UTF-8"?><CiscoIPPhoneDirectory><Title>Book</Title><Prompt>Test Book</Prompt><DirectoryEntry><Name>Test</Name><Telephone>9999</Telephone...
Dear All, My customer has installed an BE6K , but now the BE6K system status LED is Amber blinking. From the UCS C220 document , the amber blinking LED means the server is in a critical fault state, for example, boot failed, fatal CPU and/or bus err...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: