Voice Systems and Accessories - Small Business

We have several directors and assistants on staff where it would be helpful to the assistant if their phone displayed and differentiated between off hook or dnd. Currently, both off hook status and dnd report the same indicator for the assistant. U...

Hi, Wondering if soembody could help me here. I have a uc320 and router directly connected and I can ping the router from the 320 but cant ping the other way. As a result I only have SIP traffic working outbound but cant get and calls inbound. Im mis...

Hello, we have many SPAxxx models that behave curiously. We're using remote https profile provisioning. The SPA fetchs succesfully its configuration a few times. When it's a failure here is what we have in log:Mar 11 15:02:43 10.100.10.152 SPA303 54:...

I purchased one of the above. It's connected to a switch which is in turn connected to a Sagem router. Belgacom forced our ISP EDPNET to put all the Sagems into Bridge Mode as they plan to implement Vectoring.This means we are now on PPPoE and we no ...

I am on a call and a 2nd call comes up. I want to first transfer the 1st call before I take this 2nd call to some extensions. But the 2nd call gives me only 2 options - Answer and Ignore. Answer puts the 1st call on Hold which is not what I want. Ign...

Hi I've a UC520 and im tring to connect to a Voip Supplier "Engin"it is regestering and i can recieve calls but i cannot make any callsthe debug logs shows disconnect (47) "No Resouces"i'm complealy stumped i've attached a copy of the incoming and ou...

One of our customers would like to keep their UC560 system in production for awhile, but we may need to add licenses.First, with the UC560 now past end-of-sale, how long will we be able to buy license upgrades?  I could not find any information when ...

Hi all, i found small issueWhen used in the Russian language in the Caller-ID and UTF-8 encoding,   Russian letter "и" always shown small, with the others, there is no problem   if large letter that shows big character, "и" always shown as small as p...

Is there a document/Guide on how to do this correctly without messing the only healthy HDD in the server? Thanks

I am really baffled.  I have a working MP3 player conneced to the line in jack, which is verified to be playing music using headphones - The cable works as I have tested that, but I cannot get the UC320W to recognise the input source and override the...

When I pick up a phone connected to the spa to dial out, I get the following tone: short beeps for 2 seconds, then a long tone.I want to configure the Spa to get only the long tone (frequency = 440Hz)I tried to set the dial tone option under Regional...

I have upgraded from a UC540 to a UC560.I have an analogue extension and a SPA504G that are a shared extension, on the 540 when you configure a "watch" or "monitor" button on a DSS for the shared extension number the SPA504G triggers the BLF on the D...

Hi Cisco Folks,Really not sure if this is the right place for these questions. It's REALLY hard to find out any information at all about this kind of stuff.I mean, google "calllog.mdb". Not much. Do a search for "mdb" in this site, and nothing. Or "c...

I've got two SPA112's that can't get calls after a while. Firmware is the latest, 1.3.2.NAT keep alive is enabled, registration expiration is 180s. Things work great and then eventually they just stop, line goes dead, no incoming calls, no outgoing c...