Voice Systems and Accessories - Small Business

Hi, I have US 540 and I installed 2.1 SCC toolbar a year ago following some instructions that I found on the internet (Installation ot 64bit toolbar and then installing 32 bit separately). I tried today the same thing on one more PC and CME Wizard cr...

Have a site where Exchange mail server is local (192.168.1.5) to UC320 (192.168.1.254). Also UC320 DMZ address is 192.168.3.254.Cannot send email from UC320. We appear to authenticate correctly with user=voicemailsystem. (Does not work with user= voi...

We have a UC560 that was originally intended for user with a SIP trunk but circumstnaces have change.I'm confirming that indeed the VWIC2-1MFT-T1/E1 is the proper interface to add for PRI compatability and I need to clarify what signaling type as wel...

looking to see if there is any way to setup multiple attendants for incomming calls. I woud like to have one incomming line to go to one menu system and another line got to another menu with different greetings and options. I do not believe the syste...

Hello:I have an SPA232D DECT ATA with 3 SPA302D handsets registered.  No SIP connections. What I want to do is be able to send a hook flash event and dial a star code (i.e. *98 - blind call transfer) on the PSTN line when I have a current call on the...

Hi there,I have some problems in a Cisco UC540 with "Skinny Msg Server" having some CPU peaks. During peak all services are unavailable (calls, intermet access, etc. - this UC540 is our internet gateway):  100                                         ...

I have noticed something that does not really make sense -- CCA always disables the toll-fraud protection feature recently added to IOS.Even if you configure a list of allowed IPs in the SIP config in CCA, it still inserts the wildcard address of 0.0...

Dear all, First, sorry for my english ! I'm french and i will try to explain my problem. I ordered a SPA112 and i want to configure it with fax on line 1 and a modem on the line 2. http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps...

Hi,Im using uc560 and already added 250 entries.I would like to add more enetries in the addressbook. Do we have any workaround to do this?Thanks,Bijith

Hi, i have a cisco spa8800 which keeps rebooting with the following message on syslogd, does anyone have to resolve this issue ?Is there any way to do a hardware reset on the unit ? i can't use the ivr to restart the device.Thanks.

Team,I have a customer with HQ in the Eastern time zone. The owner lives 1/2 hour away which happens to be in the central timezone and has his SPA525g2 connected to HQ with the ssl vpn feature...Of course the phone is showing the Eastern Timezone but...

I need activate 4 lines of spa 841, I tested with firmware 5.1.8 of  SPA 941 and not active.Some person who has the firmware to activate the 4 lines ?Thnaks.

Hi,I have two Cisco SPA8800 and I want to make them work together to transport an analog line throught an IP network. I searched on the net and the admin guide and I've found anything that could help me so I'm asking you some help.So, I have one anal...

we have an existing environment with two UC520 an one UC540 in a multiside config.is it possible to use the Unified CallConnector Server (NOT Smart CallConnector Server) with the UC540, too?i have read that the UC540 is only working with SCC. Is that...

HiCan you use a VLAN Access Control List (VACL) on UC500?If so, what CLI commands would you use to deny a VLAN G from accessing VLAN A, B, C; yet VLAN G needs to have Internet access?Thanks