Voice Systems and Accessories - Small Business

Sorry but i'm a bit of a VoIP novice.  I'm aiming to use a UC540 with a SRP547w and a range of 7900 series phones (both confernce and desktop). Nothing stands out as incompatabile? Again forgive my lack of knowledge.Regards,Andy

I need to upgrade a client with a current UC540 to a UC560 due to license issues.  What is the right way to upgrade.Thanks.            

I have a brand new installed Server 2008 R2 VM  running Cisco SCC Server 2.1. The ccdatabase and ccautomation service are continuously stopping.  I have changed all services to manual, restarted server and services multiple times, reran a repair inst...

Hi all,I have recently updated the UC540 with the latest IOS on software pack 8.6( because i recently faced issue with whole software pack upgrade on UC520) to register 9971 phones. when i started with the following commandsvoice register globalmode ...

Using SCC Server 2.01, I periodically have problems with clients not being able to login, giving an error stating the password is invalid or the server is down. If they were connected, it will disconnect for awhile and the Directory just shows "Datab...

Hi allI factory reset my spa 3000 because i forgot my password. Now there is no IVR and when i press any key on the handset i hear nothing. By the way i can ping the device.I cannot access the web server or upgrade the firmware.I dowloaded the recove...

Hi Team,My understanding is UC560 can be integrated with CUCM via H323/SIP, however, my question is this integration supported by TAC or SBCS?ThanksAamir

I have a UC520 with two teleworkers in different sites.  All sites connect back to UC520.  Calls between phones and the "Hub" work well but calling between each other is not working.  These are true L2L ipsec tunnels with no mesh.  Do I need to have ...

Hi I have UC540 on production and adding SPA525G2 IP Phones.Phones are not getting registered.Software version is 7.4.8UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(24)SB,Phone is added through CCA and I can see the ephone and ephone-dn thro...

Hi,I've been trying to configure a Cisco 877 to give out DHCP option 66 and act as a tftp server so that I can provision the SPA112. I've managed to see that the tftp server has been accessed once by one of the devices, but it doesn't get much furthe...

We have a customer who has 2 FXO lines. Somehow one of them stopped sending outgoing audio. If you answered the line OR put it to auto attendant, the caller heard nothing. A reboot of the UC320 resolved the issue. Has anyone else encountered this? An...

Hello, anyone can tell me how to connect or integrate a SPA8800 Gateway to a UC540, I set it up as an ATA, but I fail to register with the UC540

Hi,We recently installed our first UC320 and all is working except the system has no internet access so we are unable to manage remotely and also the time on the system is incorrect due to the lack of internet access.The current setup is that there i...