Hi guys,
My SPA112 is playing 3 sets of two tones or beeps a few seconds after the call is connected. This is happening on outbound and inbound calls. I've never come across this before, and I've provisioned many ATAs.
I don't see anything in the...
SPA 112
With no other changes to either call manager or the SPA device, if I enter one call manager's IP address as the proxy and set the spa to NOT use DNS SRV, everything works perfectly. If I enter a domain as proxy and tell the spa to USE DNS ...
I just grabbed a couple of SPA514G's and WBPN's to expand my office demo/test network.After connecting the first pair of WBPN/SPA514G, I got the brilliant idea to check and see if there was any new firmware (the unit said V1.0.0) after I had configur...
I have been tasked to setup a 2951 for SIP on a Broadband circuit. The second part of this is to add a backup solution because we all know how reliable broadband is, it never goes down (now that's a lie), hence the reason for the backup plan. Our c...
What barcode format is used on boxes from Cisco?
I'm not looking to find a device I need to know if it's UPC CODE or EAN CODE or anything else from a long list of possible type.
I found multiple posts but they are old and could not find the answer....
Hi everyone,
I am networking engineer in ISP in Russia, and we have a trouble with SPA122s. Historically we have ring topology on access layer, that is why sometimes it storms. Anyway, some of our customers connected by SPA122, and its WAN-port has...
Hi everyone,
Can anyone please advise if the Cisco SPA525G2 has a paging type of function where one can pick up the phone, speak to all the phones on the system, and the voice will play through the speakers?
Any help would be greatly appreciated!...
Hello,does anyone know a way to easily upgrade on a brandnew SPA122 with shipped FW 1.0.1?The environment has NO options capable DHCP server (only 'simple' DHCP), NOR a TFTP server and NO WAY of accessing the 192.168.15.0/24 network!Available is a PC...
Hi all I am fairly new to using Cisco phones.
I have just purchased a SPA525G with a SPA500S attendance console.
It’s a fairly simple setup as it’s just one office phone and the console buttons on the attendance console are set as simple extern...
Hi. I have a couple of UC320W (that I love) but I need to be able to change the SIP registration timeout. I have found that there was a PMF for this issue, but the link to download that PMF does not resolve. Can anyone direct me to where these PMF...
Hello,I recently purchased Cisco SPA112 after breaking my old linkesys; Unfortunately I have a problem that I can not solve after several configurations made, I feel very frustrated, so I ask the community for help.
in short, the problem is manifeste...
Hello,I recently purchased Cisco SPA112 after breaking my old linkesys; Unfortunately I have a problem that I can not solve after several configurations made, I feel very frustrated, so I ask the community for help.
in short, the problem is manifeste...
Hi,
We are a voip provider that recommends to its customers Cisco/SPA. The problem is that when a call is placed in hold (sends a=sendonly in a re-INVITE and receives a a=recvonly in the 200 OK) it is ok for about 1 minute when unholding it (sends an...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: