Voice Systems and Accessories - Small Business

I am asking me if it's possible to connect a CUCM 8   ( not CME )  to a LynkSys SPA400 or SPA3102 so the SPA will act as a Gateway that have FXO line connected to to the PSTN.                   If yes, how the interaction work ? h.323, SIP ?.. any do...

I have a Callcentric SIP line programmed to my SPA9000 with (1) SPA525G phone and (1) SPA962. Everything is working fine but I cannot get the MWI to work on either phone using Callcentric voice mail. I can retrieve messages, but the MWI light does no...

Hi there,   My SPA-122 will grab a configuration file from our provisioning server if the URL provided via DHCP is HTTP, but not via HTTPS.   I've tried DHCP Option 66, 159, and 160. All work with HTTP, but none work with HTTPS.   Is there some trick...

I know this has been brought up somewhere else close to a year ago, but it's 2016 and as of the latest firmware we still don't have IPv6 support on the SPA112. They claim it's IPv6 ready, but the question is when (if ever?) do they plan on releasing...

Hi all, i have some SPA8000 with firmware 5.1.10 and want to backup devices configurations. I've already tried, unsuccessfully, to get from /admin/config.xml and /admin/spacfg.xml, as saw in other threads on supporto forum. There's any change with n...

Hello,   Is it possible on cisco spa50x to transfer call(SIP) via attendant console NOT by REFER message, but DTMF send? i.e. if in call press button send dtmf code #NUMBER#

Linksys SPA2102 adapter is registered, but outgoing calls fail with a busy tone at the end. (I only need make outgoing calls, and don't care about incoming calls, just can't test it now) A few days ago I tried  make outgoing calls and it worked. Inte...

Hi,I have an issue with configuring a SIP account. My provider wants the username and password to be cleartext. As far as I'm aware, this can be accomplished by configuring the sip-ua credentials with the password option 0 (zero). But when I try this...

Hello, I just started a contract at a client site and I need to understand how the automated attendant works because the main message no longer comes on unless put as alternate and clients cannot press 0 to leave a message. Where can I find info or s...

Hi folks,I recently purchased a Cisco SPA509G from a retailer on Amazon. The phone is working almost entirely perfectly, except I cannot get the time on the phone to be correct. I suspect that I would have to change something within the phone's web i...

I have a brand new SPA112 and haven't have any success connecting to it by any means other than the IVR.   After a factory reset, I see DHCP requests and replies on the network. I can ping the device for ~3 seconds. During that time I see a DNS reque...

Bought this for home use, plugged in to new Xfinity xFi Advanced Gateway Router, phone seemingly activates but no dial tone, and I cannot update Date.   What am I doing wrong?   Thanks.

Hey everyone,   I tried to connect my 5370 to the SPA112 and it seems to be impossible to initialize. I thought it was possible because of it 'analogic' conception but i guess it was made only for our PBX...   Does anyone have already tried those kin...

Hello,We just had daylight savings time here in the US, but our spa504g phones didn't adjust automatically.I have them configured to sync to NTP, using our internal NTP server.  Their time zone is set to GMT-05:00 (EST), with this Daylight Savings Ti...