CCA allows for traffic shapping for Voice traffic; however, it has a note that this is only for upload. How can you control or reserve bandwidth for Voice download?
HI,we are a small business and hence no full time IT support.We bought our UC560 with some 7900 phones for inhouse use and SPA525G2 for our remote sales people.SPA phones firmware 7.4.6 needs to be updated. I was told by a cisco expert that the new f...
Hi, I need some advice on the best way to set up a UC320W with an SRP547W router. I have the SRP547W successfully connected to the ADSL connection, with ethernet and WLAN from the SRP457 working correctly. The SRP457 is setup as the DHCP server.The ...
Greetings all,We've got a UC 560 with the T1/PRI interface card.Tomorrow we're switching our PRI service. We've got everything run up to the 560, tomorrow is just cable swap time for me and number port time for our provider.My biggest concern is with...
I want to hide on SPA112 all Network and the Bonjour settings for the user access.For the first time, I tried to hide and change the two settings " Host_Name" and " Domain_Name".The values "SPA112-1" for Host Name and "test" for Domain Name were chan...
I have problems with caller id. it is not visualized in my system (UC320W 2.1.4(3) , 3 x SPA303 , SPA8800)i try this:reset and reconfigureupdate 2.2.2 with factory default and reconfigureonly fxo0 (0 number of line) visualized in spa303line in UC320W...
After updating my SPA3102 to version 5.2.13 everything seems to be working fine. Except for one thing.I would like to forward anonymous calls with the PSTN-To-VoIP Gateway Setup. In the previous firmware version the anonymous CID was 0000000000, but ...
I currently have 3 analog trunk lines installed in the FXO ports and I want to dedicate and route one of the trunks to go to our fax machine that is installed on the FXS port. How do I configure this?
Hello All,I'm in the "Add Phone" menu of our UC540. I have uploaded the 7926G firmware manually but do not see it as an option in the "phone type" dropdown box. 7925 is in there but 7926 is not. Is there a way to make it appear in that dropdown or do...
Hi,I’m having a hard time setting up call hunt.right now i have 2 extensions. (100, 101)I have created a call hunt group that has both my extensions ring simultaneously.i also enabled group voicemail to fwrd to if no answer or busy.I’m testing this w...
I have a customer with a UC320W and SPA504G phones which uses Bandwidth.com to provide 5 SIP trunks. One of the users complaints that intermittently they will be on a call and receive a second call, which alerts through the handset of the phone, not ...
Hi,I am deploying spa 501 with asterisk and need to be able to disable IVR configuration menu or at least set a password for it. Would you have any idea how to do it?Regards,Konrad.
To allow multiple external numbers to call on different lines on the same phone, is there a way to assigned different users to each line on the phone? I know how to do this on a uc500 but I am a little lost with how to do this on a uc320?
Hi currently have a 320W in a Home Environment with 7 SPA525G2's. 2 of the 7 are connected to the network via Hard Wired ethernet cable, the other 5 are Wireless. I'm running into issues with two of the 525G2's and them losing their "registration"...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: