I have uc320w and I want to monitor the fxs ports (analog phone) , in configuration menu --> phones buttons --> line monitor ---> i has choice only the SPA but not Analog phone Thx
Hello.We have a SPA2102 device configured to handle two extentions, 101 and 102. There are also a series of analogue phones spread around the office that we use.The issue at hand is that the analogue phones will ring every time that extension 101 is ...
Is there method, besides blanking the user password, to disable the prompting for a password when pressing redial on the SPA50X model phones? I'd rather not leave the web interface accessible without a password. Or alternatively is there a way to pre...
Hello,when you inciating a blind transfer, the spa first put a hold (send an INVITE with sendonly), then ask for digitis and then sends the REFER. If the REFER is answered 202 Accepted it just closes everything (OK), but if the answer is 488 it does ...
Been able to get the WVC2300 cameras to work fine with the SPA phones (accessible under Setup Menu, Option 4 (Video Monitoring), select phone.Is there any way to configure one of the free line extensions (softkeys?) on the phone to automatically show...
Based on reading other posts about the SPA2102, it had two (three) siginficant drawbacks - echo and its networking implementation (LAN side?) only allowed a maximum throughout of about 7.5 Mbps (even though it's a 10/100 Mbps router), and maybe recei...
HiWe have a strange issue with our UC320.All the inbound calls are going to a shared extension which has two phones in it. On busy/no answer it goes to an Auto Attendant. Time to time it goes straight to Auto attendant without even trying to go to Sh...
Hello all,We are doing our first UC320 install right now and are having serious difficulties!The UC320 itself works fine and we can configure it to work with an analogue line. The client has 3 ISDN line they want to use with the system and we were to...
In a trunk SIP configuration, how must be configured peers & phone, in order to receive correctly incoming call?In my lab, I set up correctly an UC 540 to dial out using a local sip provider, but I can dialin, only assigning the number to a line asso...
Hi,I am setting up a night service for a client based on system time schedule, what the customer asked me if I can set the system to forward all call to an external number between 3PM and 6PM, and after 6PM all calls goes to Reception VM,The schedule...
Hi all,Everything I have read on Cisco re SmartCall Connector Server indicates that partners are able to download a trial version of SmartCall Connector server.Does anyone know where the link to this is? I am a Cisco partner and do not have permissio...
Hi,I have a UC320w with 7 SPA525G phones in an office. All have firmware updated as of a few weeks ago. Works great except that signal is poor in the far end offices (2 bars with occasional dropouts). All are operating wirelessly currently, and th...
Hi there,I'm enjoying setting up my new UC320W, except for one thing: voicemail to email is driving me crazy. I've tried gmail, Hotmal and 1and1 mail, with and without SSL/TLS, with ports 25 and 587, and I keep getting SMTP authentication failures. R...
Hello I am new to the community, I would like the information because Ipurchase a uc560.I have already in my possession a vic2 2BRI-nt / nt, and I wanted to know if I can fit on a UC560-FXO-K9 and used both fxo the bri with the suppliedsoftware and l...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: