Voice Systems and Accessories - Small Business

Hello, Is it possible to cut a calibrated (flashing 270 ms) with a PSTN port on the SPA400? cordially.Christophe

All of our SPA devices fail to understand that the caller has released the line, so the line is only dropped after several seconds and a long busy tone occuring afterwards.Is there a cure for that?Monitoring our Asterisk server, we see the line beein...

Looking for help on supporting cordless phone on UC320 knowing the UC320 does not currently support the 7921 or 7925G unified wireless IP phones at this point. I am assuming I could purchase a 900mhz analog cordless phone and use the FXO port to gain...

Hi,We are configuring a UC540 and it looks like the 8th LAN port will not work.  We have 7 phones connected and working, when we connect the 8th phone it does not work.  We have swapped cables and phones and ports but this is not the issue.  The 8th ...

Hello,I am having problems with the spa504g. This problems doesn't  happen with spa508G neither spa303 or linksys spa942. It happens with  two different units and al least one has been upgraded to the latest  firmware.The problem is that the spa send...

Hello.We're aware of a problem on a UC320 with 4x Analogue circuits, no SIP.If an inbound call makes it to voicemail, then the unit doesn't detect the line disconnect which results in lots of 10 minute voicemail messages.I think I remember somebody e...

SPA9000  FW: 6.1.5 SPA400    FW:  1.1.2.2SPA921    FW:  5.1.8All devices are on the same LAN (private lan, only used for VOIP), no firewalls.  Not using DHCP, all phone instruments have static IP's assigned (12 instruments).  The SPA400 has a single ...

We have a couple of customers who are running the SPA9000 but are looking to upgrade. The UC320W would be a good candidate for them, but they already have a fairly significant investment in SPA942s, SPA941s, etc. Since you guys made them, how about s...

I have provisioning on my SPA 5xx phones:<Profile_Rule_B>tftp://tftpserver/ipphone/linksys/spa-all.cfg</Profile_Rule_B><Profile_Rule_C>tftp://tftpserver/ipphone/linksys/$PSN.cfg</Profile_Rule_C><Profile_Rule_D>tftp://tftpserver/ipphone/linksys/mac/$M...

Hi all.I've got a few questions regarding UC560 integration. I'll appretiate if somebody can help me with them.1) Scalability - Does 104 seats mean someone with an extension in the office, that is fwd to a home extension counts as 1 or 2 seats, and w...

After login to uc320w console i just pulled the triger on the latest ugrade notification (2.1.1) and after restart console wont to show up. In browser tab i have : firmware upgrade notification. phones still working fine, but cant access console. tel...

Hello !Is there some way how we can buy new battery for WIP330?Tomas