Hi Sir,after press IE 192.168.10.1 the uc320 hang on green bar,not going to login page,what reason happen?Flash player version 11.please see attachment file and urgent reply.Thanks
The time that shows on our 7975 phones is 4 hours earlier than the system time on our UC520. When I go to configure with the CCA 3.1.1, Device Settings - Time, the time is accurate and in the correct time zone. It is as if the phones think they are i...
Does anyone know if UC320 can have a SIP trunk to the SRP521W-K9-G1 or SRP541W-A-K9? These routers have FXS ports and can have a SIP trunk to a SIP Proxy so that users at remote sites can have analog phones plugged into FXS ports and be able to utili...
I have a SIP provider I'm testing a UC320 with.For some reason when I add the hostname (as instructed by provider) for proxy server, they do not see any attemps from my end trying to register. If I substitute this with an IP address, they see regist...
Hi Everyone,I am looking for an addon that will do wake up calls, etc for a Hotel.Anyone have any ideas to be able to implement this with a UC540 or 560?Thanks!Chris
Hello, I have a client that says when they press the "Conference" button on their 7945 phone it says they are unable to conference.Any ideas why this is happening? What should be checked.The system is a UC520 with five 7945 phones.Thank you, Paul
Hello:I'm new here and it was suggested from Cisco Tech support that I start a discussion in the hopes that I might find some sort of solution to my issue.I just purchased a UC320W for the sole purpose of testing analog faxing via VOIP.Going through ...
I configured a SPA504g for a customer demo. worked fine here on my network, hangs "Initializing Network" on their network. Works fine on other networks too. Other devices (other type of SIP phone, printers, my laptop) have no problem getting DHCP add...
I connect to my Cisco UC540 remotely through VPN and use Cisco Communicator. This works fine, however once I connect to VPN, internet slows down significantly. Is it possible to setup the phone through VPN and the rest of the traffic through my local...
I am being asked if there is an automatic method to add a 9 to the missed call number for users to return calls by just pressing 'dial' from the history. I know we can hit the edit and add the 9 there but I have been asked if this could be done with...
HiI have the following setup:Internet¦Dreytek 2830n (20.10.10.1) serving DHCP¦UC320W WAN portI've selected topology 2 - UC320w handles voice only and selected the automatic DHCP option.On the Dreytek I can see it's assigned 20.10.10.4 to the UC320W -...
Could anyone tell me the best configuration for the SG200 switch when used with a UC320.We are hoping to plug the UC320->SG200->Phones->PC plugged into phone.With the UC320 plugged into the switch, the switch picked up a DHCP address from the UC320's...
Hello Folks,I have begun using NexVortex as a SIP trunk provider for my UC320, and am considering deploying the service to several customers. One item I found unusual is that all inbound calls are presented to the UC320 with "+1" prepended to the inb...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: