I'm using a SIP provider and outbound calls are failing and I think the culprit is Remote-Party-ID being enabled on the phone by the UC320.How can I disable this?ThanksDarren
Hi -- has anyone any experience of and/or pointers to using a UC320 with phones connected via a C2960G switch?We have this situation. I've enabled CDP and VLAN 100 on the switch and ports, but there are few funny things happening. IOS is 12.2(44)SE f...
Hi thereNew listener, first-time caller ...Have a client who operate two businesses. Say Alice Adventures and Bob's Baskets.1. They wish to route incoming calls from different SIP trunks to different people, etc.This looks like its possible by adding...
I have just started working on a new UC320W and am struggling to see how to enable international dialing.I have the 9 prefix set for outside line but can only dial US numbers. The units region has been set to US as it will be installed in our US off...
How to integrate SPA 8800 with SPA9000please provide configuration or step for integrate this becuase my exiting system use SPA400 and now it goneplease help this case becuase i buy spa 8800 already and now i can't use this thank you for best support...
Hello,My customer would like to have their call flow for inbound calls to go to a hunt group during the day and automatically switch to an AA at night. There doesn't seem to be a way via the CCA3.1.(1) to achieve this.Can anyone offer any directions?
I have a problem with my UC540 with it hanging onto an incoming call despite the fact that the calling party has terminated the call.I would call my trunk line from my cell and the autoattendant will answer. If I hang up my cell, and then try back t...
We had to switch to our demo UC-540 after the upgrade to 8.2 bricked our production UC-540.I figured it would be best to reset the demo unit to factory defaults and configure it from scratch.Now, it appears that everything is how I want it except it ...
We are having a problem with a recent UC560 implementation. There is a requirement for 2 prompts to be played with AA; one for open business hours and the other for closed business hours. We have been able to add the customs prompt for the open busin...
Hi, I configure and deliver to my clients a Cisco UC520 solutions for their telephony communications, with FXO analog lines.Some of our customer are experiencing a significant delay when an incoming call arrives :When i call one of the FXO lines, the...
Is it possible to allow the external MOH feed into the UC500 series to be played on a handset?I thought I saw somewhere that there is an extension that a user could dial and the music feed will be presented through the handset or via speakerphone.Any...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
