Voice Systems and Accessories - Small Business

WHAT:======UC320W  2.1.1 General Availability feature release firmware contains country support for Australia, Austria, Canada, Chile, France, Germany, Hong  Kong, Ireland, Italy, Mexico, New Zealand, Portugal, Singapore, Spain, United Kingdom and Un...

UC540/560 running 8.1 or 8.2, with CCA 3.1 configuring Multisite.  Where are the definitive configuration steps for this?  Old versions have you removethe 0.0.0.0 0.0.0.0 route statement, these versions don't seem to work without it.  We've got four ...

Is there an iPhone apps compatible with UC500 to make call by wifi or VPN ??

Hello, Since upgrading to latest RC (22) I've found a repeatable crash on our SPA504G's. I have setup a shared FXO to a dedicated button on the 504. If I open the line by pressing this button, then try and use a speed dial number by hitting for examp...

I'm trying to configure a UC540W (latest CCA and SWP) with call-back rules but all I get is "Unknow Number" when I try to dial a missed number -- it never puts the 9 in there.I'm looking for the CLI changes that are suppose to take place for this fea...

CCA WONT BACKUP CONFIGWindows 7 x64 OS.When attempting to backup the configuration from my UC-540 (the one where the wireless only works for 3 seconds after a power cycle) the configuration ends with a "Backup Compete" message.  When you attempt to b...

Hi Folks,Can someone please suggest a recommended extract for UC500 software pack in flash.I believe it currently comes with a directory structure in place.This is great for categorization, but then load command with ".loads" extension is of no use, ...

Hello everyone!I'm having an issue with a new UC320 install for a client.Inbound calls come from a SIP trunk to the UC320.  From there, the client requests that the system act like a key system.  I know that in the UC320 config page SIP trunks and a ...

We have few fax to email numbers setup on our UC540.  Problem we're having is that, no one actually monitors the actual voice mailboxes so when they become full fax to email stops working.Is there a way to avoid this in the future - possibly automate...

Forgive me if this is a subject thats been talked about before, but I could not find any answers.I'm setting up my first UC540, using CCA 3.1.1. All seems to go fine. I have no POTS, and my SIP truck is working... except it rings busy if I call in wi...

I have a combination of SPA 502 and 504g sets with a UC320.  We are seeing that it can take up to 60 seconds (sometimes more) before the MWI indicator turns on after a voice message is left for a user / phone.  And that it will take just as long for ...

Hi,We use some WBP54G with SPA-2102. At the beginning, we had Windows XP so we were configuring the adapters with the Wizard Setup and all was fine.But since we use Windows Vista or 7, when accessing step 6 in the wizard setup, the error "Communicati...

Hi Team,Today during an installation I had to redo some DID mapping using CCA 3.1.1 (This system was configured using CCA 3.1), and I ran into some very annoying and problematic issues.Firstly in the staged configuration of the system on the LAB benc...