Voice Systems and Accessories - Small Business

hi there i have some problems with setting up a BT voip trunk. The issue here is I can receive calls and make outside calls, but only on landline numbers? my setting:Provider: Generic SIP ProviderDescription: btProxy: bmnhb-03.bt.comRegistration:  ch...

Hello,First time user on the discussion Alright - when someone calls into our system, our SIP Provider (Skype) sometimes receives a 410 message from our UC320 and the call will not ring. Now, this is a hit and miss thing so I am unsure why it works s...

Does anybody know if you can run the latest Skinny firmware for the 7900 series phones on the UC500's without issue?  The only mention I've seen about it is that the VPN client on the 7900 won't work yet because it needs CME 8.5.  As I don't use VPN ...

We are trying to setup a remote phone on our UC 500.  Going through the setup process we need to download the SSL VPN client and install it on the UC500.When I go to the website to download the client we are told that we cannot download the client si...

Just wondering if there is an ETA on the software pack release for the UC5xx.  I saw that it was supposed to be released today but wanted to verify.

Hello all,I've been in telecom for about 24 years now, primarily in small/medium business environments.Got my first 320 last week and I've been playing with it all week.It's a cool little platform, and it does much more than I expected it would for t...

While setting up our Demo UC 540 we had the Office Manager application setup and working on a pc.  After we completed the setup of the Smart CallConnector Server we can no longer access the UC 540 with the Office Manager.  The CCA still works on the ...

We have run into a problem with our UC500 setups regarding Smart CallConnector and Office Manager both functioning with the same UC500.  It appears that Office Manager will only work if the UC500 configuration is 100% CCA.  For most of the phone feat...

We have a UC540 system that we are setting up with the "The Office" demo.  Already have the phones and users setup, but we would also like to demo the full CallConnector - both operator and user with a server for presense.To help limit the number of ...

Does anybody have an ITSP they prefer (UC540/560)?

I am having issue with call parking on my PBX system (SPA 9000 + 2 phones 942 series), when I park let's say 2 external calls or even 1 then I can not come back to any of them (callers hear music on their lines when on hold but that is it)What steps ...

HI,as you may see form earlier posts we had some issues setting up an SR520 FE as a teleworker router connectin via VPN to a UC560.Thanks to Steven DiStefano we got it working.Since then I have discovered that if we disconnect the only Switch on the ...

I am waiting on the support contract number to come through for this customer but I thought someone here may know the fix already.I have a UC320W which sees the spa504's ok but the single spa509g just doesnt want to register. I have tried resetting t...

i'm having a problem getting my ad-hoc conferencing to work if i press the confrnc button and dial a number then press confrnc button again i get the message cannot compleate connectionhere is the show dspfarm all and the show sccp all data and i hav...