What can be done so that we can eliminate the 9 to dial out in PBX mode. Have had deals lost because you can not remove like old TDM's. You can do it via cli in CME, but not the UC500. Why?
I noticed that there are options on my phone web interface that appear as though I should be able to modify them but I am unable to find a way to get into an "admin" mode for my phone. Specifically I would like to change my headset input gain, which...
Hello,The phone succesfully register to asterisk but no call is receive.PBXStatus show the sip peers port unreachable but with the same settings with HTC Phone is OK.Please Help me to found where is the bug.Thanks.Will
I was wondering if you anyone has run into this particular situation with a UC320 before. The auto attendant works perfectly as long as the caller is on a land line. If they call in from a cell phone then the system completely ignores all button pr...
Greetings! We're working on creating a backup system for our UC540/560 systems. One of the things we're concerned about is keeping voicemail messages from customers, and since we're a company with sensitive information, we have a policy of data re...
guys,i have some questions regarding setting up network with the uc 320 system. uc 320 will only be used for voice, and the other router will handle the data portion. there are 2 switches for voice and data as well, but the access point will connect ...
I am a beginner at the UC 320. I have a customer who has a couple Valcom paging horns. They have 1 - V-1030C and 1 - V-1090. Can anybody help me with the needed parts to make this work? Does anybody have any documentation on setting up external p...
Has anyone been successful in using other non/cisco poe switches on the UC320? If so, is there any specific requirements of the POE switch or programming?Thanks
I am trying to unlock the network configuration on the phone but cant find out how. I had previously searched on the internet and found it but today I cant. Please tell me the unlock code also if you have a link to a doc that would be great.Thanks,Jo...
I am having trouble getting the camera to show on my 525G. I added the camera to the site with the Video monitor setup wizard. It appears everything was entered correctly and I have the option of selecting the camera on my phone. However, it does ...
Hello,I finished the installation of a UC560.I installed localization files in French. Messaging is well in French now.But I still have a problem. Is it the French version of the files "bacdprompt" exist ? (eg en_bacd_welcome.au).I find no informatio...
Hi All,After hours of Googling, and yet again the great wisdom and advice of Dave Harper (Cisco), managed to get a decent XML feed up and running on the SPA-500 series phones.I found a brilliant site hosted here in Australia with mainly Aussie conten...
Hi,My brand new SPA2102 reboots approximately every 10 minutes.I have recorded some log information, but I have a bit of a hard time making sense of it all.Below is a part of the syslog I captured.The reference domain, unref domain and last unref for...
We installed a UC560 that has been nothing but problems with the voicemail system.Here is an example of what happens. A user gets a voicemail indicator light. They log into the voicemail system and get this message -You have 2 new messages. To pl...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: