How exactly does the SCCP protocol work on the UC520 with 79 series phones. How many different codes are there? What is the default codec used? Can you change the codec used to one of lower bandwidth? What is the CLI config area to do this?Thank...
Hello, we are considering the UC320, our current provider has limitations when it comes to caller ID. We have a hunt group that rings all of our phones in the office when a customer dials in on the main line. Our current hosted IP-PBX system stripe...
Have a UC560 that is running 8.0.0. The caller-id is showing the number but not the name of the person that is calling from an outside line. They have a PRI from Windstream. Was wondering if anybody thinks this is a configuration issue on the UC56...
I need to be able to turn off and on SNR right from the phone but it looks like it only allows to change the number. Is it possible to enable/disable right from the phone? Seems odd it's not there.
We are using UC560, Software Pack 8.17965 PhonesWe have a basic 4 wire wired headset connected to the headset port on the back of the phone. When we toggle the headset button on and dial out or press the messages button, we do not hear any sound and ...
I have sip trunks and wanted to set the name caller-id based on the extension. So:Outgoing call from ext. 202 - ABC Company (this shows on the name caller-id of the receiving party)Outgoing call from ext. 302- XYX Company (this shows on the name ...
Ok...I dont think there is a fix for this, but I wanted to see if anyone else had any suggestions/solutions for this. This seems like a design flaw with the Sidecars for the 500S. I have users who all have 508G Phones with 500S sidecars. The issue...
I am trying to set up this WIP310 on my Call Manager with no scucess. The phone is logged into the wireless and has a ip but I can't get the TFTP section on the phone to populate. I have added opttion 150 to the dhcp server but he phone is not pick...
I have have 2 UC series boxes connected via SIP dial-peers. Read as simple site-to-site peers.Box 1 has an FXO port connected to the PSTN.If a call comes in from box 2 via the SIP dial-peer, with digits matching the destination-pattern of the POTS ...
Hi Guys,I recently upgraded my phone setup from a SPA400 / 9000 PBX combo to a UC540. I have noticed that when using my SPA504g phones, I no longer get some basic menu options such as:- turning call waiting on and off- call fwd when busy However, I c...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: