Voice Systems and Accessories - Small Business

SPA 303 and 504G SRTP issueHi,I have a problem that when SRTP mode is enabled on SPA 303 and 504G answer "488 not acceptable here" on incoming INVITE. SDP of incoming INVITE:v=0o=FreeSWITCH 1505106066 1505106067 IN IP4 38.108.164.66s=FreeSWITCHc=IN I...

the pap2-na ask for password in the process of reset, after the 73738# and i need the password, plz help

Hi!I have a problem.Hardware and configuration:I have a router TP-Link TL-MR3420 with 4G USB Modem Key and Cisco SPA112 connect. I have config ATA with Messagenet provider with this guide: Here.I setup the Line1, the line 2 isn't use. Attach on Line1...

Just got a new SPA-942 yesterday, which comes with firmware 5.1.15 (suprise. consider the phone is manfactured on 09/2009). the firmware 5.2.5 upgrade process brought the phone to PhoneInRecoveryMode.I tried  rec-SPA942-5-2-8.exe and  rec-SPA942-6-1-...

hello,I have installed  Asterisk 11.25.1 on unbuntu 14.4 locally and it is working fine. I am able to register softphones without any problem. I bought a refurbished Cisco SPA504G with software version 7.6.2 recently.  However, when i tried to regist...

I seem to have a problem with the Message Waiting inticator on my phones. I have bought two SPA112's and they both seem to have the same problem with different phones.Basically, when someone leaves a message, the MWI turns on on the phones attached, ...

This has been ongoing since I purchased this device. Sometimes it works fine but mostly when the phone rings, I pick it up and it crashes, line lights go out and it resets. This is the error Jan  1 00:00:05 SPA112 kern.err [17179569.420000] physmap-f...

I have the cisco spa112 ATA and I'm trying to update the firmware; https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/csbpvga/spa100-200/release/source/spa112-122-rn-1-4-1-SR1/spa112-122-rn-1-4-1-SR1.html, but I cannot find any info on ATAs with a S...

I have several phones on multiple networks locking up (freezing). I have read several posts about the SMB phones locking up issue and it seems that there hasn't been much in the way of reproducing this problem.   I've been able to replicate the lock ...

Hello,Long story short, I'm looking to buy a Cisco SPA112 refurbished from a guy who sells ATAs, he showed me the ATA that he's going to sell to me and all, but the memory on it is 32MB. Quickly looking here https://www.cisco.com/c/en/us/td/docs/voic...

I have an issue with the SPA 122 fax capability.  SPA 122 device is register on UCM and making a call without any issues.  When i tried to send fax, connection was made with other end device but I'm getting failed massage while trying to send a docum...

Hi community , I have an ATA SPA122 connected to my modem router ..i'm not getting any audio. below what i have done so far :Network configuration :internet |MOdem Router (Hub 2000) - SagemCom fast 5250|SPA 122 (via internet : blue connection)|phone ...

I have bought a new Cisco Spa 8000 gateway and have update firmware to 6.1.12 and have 8 sip lines registered and working,the issue i have is incoming calls only ring in once and when first sip is busy it gives me busy tone,i want it to hunt to the o...

I'm having issue registering a 9971 phone on a UC520 running CME 8.6Here are the relevant configs -voice register global mode cme source-address 10.1.1.1 port 5060 max-dn 224 max-pool 56 load 9971 sip9971.9-2-2 load 7971 term71.default authenticate r...