Voice Systems and Accessories - Small Business

Hi,I ran into a weird issue today setting up a UC540 :We created a blast group with 15 SPA 5xx phones and one fxs port (set up as a user phone for an analog wireless phone), but when trying to call the group, the system would just reboot on itself......

Hi,Has anyone ever tried hooking up some old paging amplifier (the ones you plugged into the paging port on plain old pbx systems) into an fxs port on the UC540 ? Or should I be using an fxo port instead ?Thanks.

Hi All,Hoping someone has seen this before.I have a FXO line coming into a UC540, and have programmed it as a 'CO line' on the first button of a SPA525G phone.The line works fine for outbound calls.  For inbound calls, the phone will not ring.  The k...

Hello, i hope someone can help me, i have an SPA9000 and an SPA400, The SPA400 detects the pstn line in the Config. Webpage, but none of the leds turn on when i connect the PSTN line to a FX0 port, i have tried to run the setup and doesn´t detect the...

I'm sure I've managed to fix this before, but somewhere along the line I've undone it.Calls coming into us show the leading 0 truncated, i.e if someone calls from 01279813076 we see 1279813076.How can we get the 0 back? And prefereable add a 9 to is,...

In my long and fruitless search for a working UC560, (and having dragged an unsuspecting Dave Trad intothe morass as well, who has given unstintingly of his time and expertise!), thanks to Dave I had an internal phone network functional (well, 3 SIP ...

Hello,I have an interesting scenerio that I am not sure how to handle...  I have a customer with the following call flow:1.  PRI routes calls into an AA at ext 8502.  AA transfers calls out to a shared line on two receptionist phones ( ext 197 )3.  I...

Does anyone know a good way to support a door entry system on aUC320?

Does anyone know what the Reliability Rating is for a UC540 and UC560?

Hi Guys,Are the software packs still located @ https://communities.cisco.com/docs/DOC-1437 ?I am having the following error when accessing these packs" Please login to access this site (top right of this screen).  If your  login is unsuccessful, your...

I am trying to get my new UC540 it onto the BT IPVS service. I have all the account info, but it will not Register. Does anyone have a print out of what settings to put in which boxes, just to make sure I have done it right.Many thanks,Mike

I am using a UC320 with an FXO line from Comcast that has call waiting on the line itself.  If you have a standard phone attached to the line, you can do a "flash hook" and a "*" code to grab the incoming call.  I don't seem to be able to figure out ...

I have recently installed a UC540 at a customers site.The fault is half the calls between extensions and from external carrier goto busy when the phone is not in use. I have watched the ephone and it shows IDLE, yet the trace and tone returns busy!I ...

HelloI have a problem with all IP phones Cisco SPA502G of my office.Phones reboot itself each 3600 seg. (resync).I think the problems if with the provisioning file but I'm not sure and I don't know where is the problem.Software version is 7.4.8Please...