Voice Systems and Accessories - Small Business

I have 10 SPA508g attached to a hosted PBX. The handsets are set up with EXT1 as the users personal extension number, these ring. The other EXT keys are assigned to various exchange lines and do not ring just flash. The users should be in a positio...

Hi,I have a potential customer is a doctor's office. They want to know if the voicemail can accept the voicemail and have the caller dial the call back number, the information either to be sent to the doctor via email or text message.The main reason ...

Does anyone have recommendations for a "cheap" SIP Trunk provider I can use for testing?

Hi,Here in the UK, BT's (British Telecom) SIP service is tightly configured to their own hardware and they won't tell you how to set up SIP accounts on other hardware. If you know where to look, then you can get the required details and set up the SI...

I'm trying to get a site-to-site tunnel up between a UC540 and another device.  I've got the tunnel up and connected fine so my VPN settings are ok.  But no traffic is passing.  My cisco config is below and I've verified the remote sides config as we...

I have a customer who is interested in upgrading his phone system to a UC540. He has a specific feature that I am not sure exists or is even possible. This customer is a boat dealer and spends a lot of time roaming around the parking lot and through...

When uploading a MOH to the uc560 flash, what format is required? Can you use a .wav file or is it the same restriction off CME - a specially formatted .au?

Can you do more then one MOH on uc560? We're quoting a uc560, and potential client has 2 companies in house. They were wondering if we could setup 2 seperate MOH.. one MOH for company A and a seperate MOH for company B?

Using Cisco Small Business Office Manager and a UC540, when selecting a User under Users and Groups and entering Manage Users >> xxx, I'm not given a Save option for any edited fields.  Save is inactive while Reset is the consistenly the only option ...

Running 7.4.8 on both a 504 and 525 and have found that using BLF when more than 3 users configured completly locks up the phones when the notify is sent, if 3 or less users are contained in the notify then no problem , have a sip trace if required

After upgrading my SPA504G to version 7.4.7 my BLFs are no longer working.  If I downgrade to 7.4.6 they work again with no configuration change.  Has the BLF configuration process changed with 7.4.7?  I didn't see anything about it in the release no...

Dear all,Urgent!!! 1>Do any body know that,the UC320 FXO Can't Show Caller ID after Connected MP-118 FXS,uc320's ip phone screen just show 'fx01 or fxo2 or fxo3",any body know how to solve on uc320.But before the SPA9000 connected with MP-118,it SPA9...