Voice Systems and Accessories - Small Business

Can we networking three UC500 on a WAN

Hi Guys,Have a small problem I'm hoping someone can assit with, I have a configured device that is work for outbound calling on SIP and FXO, I dial ** to  get to the FXO port (gw0) and no issue can dial normal numbers no problem, the problem however ...

Hi,The headers x-CiscoIPPhoneModelName, x-CiscoIPPhoneDisplay and x-CiscoIPPhoneSDKVersion are present in the HTTP request from the phone when used by for example an XML application or a PSK but not for the HTTP request done for Profile_Rule. On the ...

Installed Cisco Office Manager 1.1 but getting error in 1.0 as well,Scenario - IP of UC540: 192.168.20.1 vlan 1 IP 192.168.2.1 vlan 2 (cisco-voice)Error Reading Phone Settings (percent bar @ 50%)when trying to open program.Thoughts or suggestions...

UC560 - SP 8.0.2CME 8.0ADVIPSERVICESK9-M), Version 15.0(1)XA2SPA508G phoneUsers can see whole # when calling in, but when connected it says"From xxxxxxxx time"  - Missing the last 2 digits.Can we drop the "From"?On 504G phones, I can see the whole # ...

Are the greetings for personal mailboxes stored anywhere accessible?  Somehow, greetings got switched around on a failed restore.  A couple of users now have greetings with other user's voices.  The users are not around at the moment to rerecord them...

Has anyone had any luck getting Acrobits softphone or any softphone other than Cisco's working on a UC 500.  We have a UC560 and I have Acrobits so it will connect, register, and place an outbound call over a 3g VPN connection and wireless connection...

test:<CiscoIPPhoneText>  <Title>Cisco XML Test Message Demo</Title>  <Prompt />  <Text>Please join us for John's Birthday Celebration in the cafeteria</Text> </CiscoIPPhoneText>addied to the phone as a soft key   -  fnc=xml;url=http://xxx.xxx.com/sip...

I have a couple of questions around the timecard view functionality: 1. Is there anyway to clock in without being at a phone?2. Can multiple people clock in on one phone? Thanks for your help.

Hi,I am programming a UC540 with SPA502G phones. The call logs in the phone show a date of 8 days ahead of an actual call time. That is, when a call is made now on 7 December 2010, it shows a date of 15 december 2010. The time is correct though.The d...