Hi, We are using a Cisco SPA514G with the latest firmware for our receptionist and we have the following problem: She answers a call on line 1, and while she is talking, a second call comes on line 2 and it makes the transfer dss key disappears, so ...
Hi Folks,
This is my first time configuring a voip gateway, so I may be missing something simple.
I am trying to configure a SPA112 device to connect to a SIP provider and then plug a regular analogue telephone into the phone port of the ATA device t...
Hi I have problems with DTMF tones through analogue lineI have my two old gateways, one is GSM/VOIP Setuata211g, and 2nd is SPA3102I was using SPA3102 for many years to make calls from analogue phone through VOIP or landline providers without any pro...
SPA508G firmware upgrade not possible. Firewall, etc are all off.
Software Message: Rating for Firmware download request from SPA
IP Phone Message: upgrading firmware..
..but nothing happens..
please help
How do I program the screen/line buttons to the right?
It just shows the extension number on all 4 line buttons.
I have gone through the entire user manual and do not see how to do this.
We have dozens of Cisco SPA5xxG phones in production and they work fine, except for one BIG issue.
If a person is performing an assisted transfer and a new call comes into their phone, their LCD display changes from the XFER screen to the new call sc...
I have multiple CUCM clusters with multiple Expressway in different regions of the world. At the moment when a Jabber user from external does a directory lookup they only see users in the home cluster because of UDS and the directory is limited to e...
Suddenly my Cisco SPA525g is no longer displaying my line extensions next to the buttons. Whenever, I pick up the phone, there is no dial tone. Also, I am no longer receiving calls. I tried calling my phone provider to see if they could reconfigure t...
We are using Cisco Switches, recently planning to roll out Cisco SPA phones. Cisco Switch supports CDP, what Vlan settings do I have to configure on the SPA phones?
On the cisco switch we plan to configure vlan 100 for data, vlan 200 for voice.
The b...
Hello,
we have a Cisco UC320W (firmware 2.3.2(6)) and some Cisco SPA303 (software 7.5.2(u3)).
We have this issue: we have assigned a phone to a new user, so we have changed the name of that user on the "UC320W configuration utility" (under "Users/P...
I have been looking and trying for days to get the UC560 to send VM to email at Office 365 hosted Exchange.
I have read countless forums and documents and nothing is working.
I have tried all the options in this MS document, https://support.office....
Hi, at the company I work at, we use a UC520. Voicemail used to work, but awhile ago a SIP Trunk was added and the voicemail stopped working. I was not the one who added the SIP Trunk, so I'm not sure if anything else was changed while that happened....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: