cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

4541
Views
0
Helpful
5
Replies
Beginner

Business Edition 6000 - 2nd Power Supply

Anyone know of a reason that the optional power supply for the C200/C210 cannot be ordered as part of the solution for BE6K?

STEP: 7 Order a redundant power supply. (optional)

One power supply ships with the base server chassis. You can order one redundant power supply.

● 650W Power supply unit with added 5A Standby for C200/C210 R2X0-PSU2-650W-SB

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644227.pdf

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Business Edition 6000 - 2nd Power Supply

There's no reason not to order it. They didn't include it by default to "contain costs". Yes, I laughed too.

View solution in original post

5 REPLIES 5
Highlighted

Business Edition 6000 - 2nd Power Supply

There's no reason not to order it. They didn't include it by default to "contain costs". Yes, I laughed too.

View solution in original post

Highlighted
Enthusiast

Business Edition 6000 - 2nd Power Supply

Funny:

SRND for CUCM 8.5 states that CUCMBE 6000 only supports a single power supply.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/callpros.html#wp1258944

Regards

-Alex

Highlighted
Beginner

Business Edition 6000 - 2nd Power Supply

Funnier:

Redundant Power supplies on UCS C210 TRCs are highly recommended. UCS C200 TRCs for Business Edition 6000 only ship with one, but a second can be added as separate spare if desired.

http://docwiki.cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

Highlighted
Beginner

Can I install the secondary

Can I install the secondary power supply with the servers in production without affecting service?

Highlighted
Contributor

Re: Business Edition 6000 - 2nd Power Supply

Hello,

 

I also had same challenge when proposed the BE6M-M5-K9 server. I checked with TAC and confirmed that additional PSU is supported provided it is purchased from Cisco and both power supplies must be identical meaning both PSU should have the same PID.

 

Please check the current PSU PID and order the additional one with the same PSU PID.

 

with regards,

Ritesh Desai.