Thinking Workshop”. Cisco Small Business is excited to invite its
Silicon Valley customers to an exclusive interactive one-day session
customers and product Managers. If you are interested in this
workshop, please fill out the Registration
For more information, please check out our FAQ
Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter
here's my problem
I have a UC500 configure in my lan network using WAN port (it's behind the router as the other server/pc)
everything's was working but suddendly the SIP stop registering
so i delete the sip trunk config and recreate it but now it's not working anymore
how can I see what's not working, I guess there's a way to check out a log when the sip trunk try to connect to the provider's server ?
i enter this in CLI :
debug ccsip messages
but it's not showing anything !
I test the SIP on a softphone in my lan and it's working so it's not a problem from my provider
i've been able to register my sip trunk, I can make call and 2 way audio is ok but the problem is that I can't receivecall on the SIP number it says that the number is not in service.
before it stopped working, I had connection-reuse in my sip-ua config. Now as soon as I put connection-reuse my SIP isn'T registered and I can't make calls
tommy vallee wrote:
another strange thing
If i setup a softphone(x-lite) on my laptop with the same SIP trunk, then the call are coming into my uc500 !
That is normal, the softphone is doing the registration on behalf of the UC500 , that for some reasons fails to srat or succeed.