cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1338
Views
0
Helpful
10
Replies

can't register sip trunk !

datak2011
Level 1
Level 1

here's my problem

I have a UC500 configure in my lan network using WAN port (it's behind the router as the other server/pc)

everything's was working but suddendly the SIP stop registering

so i delete the sip trunk config and recreate it but now it's not working anymore

how can I see what's not working, I guess there's a way to check out a log when the sip trunk try to connect to the provider's server ?

i enter this in CLI :

debug ccsip messages

but it's not showing anything !

I test the SIP on a softphone in my lan and it's working so it's not a problem from my provider                  

10 Replies 10

paolo bevilacqua
Hall of Fame
Hall of Fame

Do "term mon" when taking debug traces.

i've been able to register my sip trunk, I can make call and 2 way audio is ok but the problem is that I can't receivecall on the SIP number it says that the number is not in service.

before it stopped working, I had connection-reuse in my sip-ua config. Now as soon as I put connection-reuse my SIP isn'T registered and I can't make calls

why ?

Shoud look as traces as indicated above.

i put term mon with debug ccsip messages and nothing's showing

another strange thing

If i setup a softphone(x-lite) on my laptop with the same SIP trunk, then the call are coming into my uc500 !

WTF !

tommy vallee wrote:

another strange thing

If i setup a softphone(x-lite) on my laptop with the same SIP trunk, then the call are coming into my uc500 !

WTF !

That is normal, the softphone is doing the registration on behalf of the UC500 , that for some reasons fails to srat or succeed.

how can i find why it fails

taking traces, show commands, posting config, etc.

tell me what you want to see and i'll give you

sorry i'm not a IOS specialist

All mentioned above already, plus "show sip ua registration status".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: