cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Announcement“Cisco Design Thinking Workshop”. Cisco Small Business is excited to invite its Silicon Valley customers to an exclusive interactive one-day session between customers and product Managers.  If you are interested in this exclusive workshop, please fill out the Registration Form. For more information, please check out our FAQ


Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

770
Views
0
Helpful
10
Replies
Beginner

can't register sip trunk !

here's my problem

I have a UC500 configure in my lan network using WAN port (it's behind the router as the other server/pc)

everything's was working but suddendly the SIP stop registering

so i delete the sip trunk config and recreate it but now it's not working anymore

how can I see what's not working, I guess there's a way to check out a log when the sip trunk try to connect to the provider's server ?

i enter this in CLI :

debug ccsip messages

but it's not showing anything !

I test the SIP on a softphone in my lan and it's working so it's not a problem from my provider                  

10 REPLIES 10
Hall of Fame Master

can't register sip trunk !

Do "term mon" when taking debug traces.

Beginner

can't register sip trunk !

i've been able to register my sip trunk, I can make call and 2 way audio is ok but the problem is that I can't receivecall on the SIP number it says that the number is not in service.

before it stopped working, I had connection-reuse in my sip-ua config. Now as soon as I put connection-reuse my SIP isn'T registered and I can't make calls

why ?

Hall of Fame Master

can't register sip trunk !

Shoud look as traces as indicated above.

Beginner

can't register sip trunk !

i put term mon with debug ccsip messages and nothing's showing

Beginner

can't register sip trunk !

another strange thing

If i setup a softphone(x-lite) on my laptop with the same SIP trunk, then the call are coming into my uc500 !

WTF !

Hall of Fame Master

can't register sip trunk !

tommy vallee wrote:

another strange thing

If i setup a softphone(x-lite) on my laptop with the same SIP trunk, then the call are coming into my uc500 !

WTF !

That is normal, the softphone is doing the registration on behalf of the UC500 , that for some reasons fails to srat or succeed.

Beginner

can't register sip trunk !

how can i find why it fails

Hall of Fame Master

Re: can't register sip trunk !

taking traces, show commands, posting config, etc.

Highlighted
Beginner

Re: can't register sip trunk !

tell me what you want to see and i'll give you

sorry i'm not a IOS specialist

Hall of Fame Master

Re: can't register sip trunk !

All mentioned above already, plus "show sip ua registration status".