cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

471
Views
0
Helpful
3
Replies
James Tavares
Beginner

CCA and different MOH per phone/line

Is there a way, using CCA, to configure MOH groups?

I've got 2 clinics, each with their own DID but sharing one UC560.  I've split the DN's so that clinic 1 is on x300-399 and clinic 2 is on x400-499.  Can each DN range have it's own MOH?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
johschaf
Enthusiast

Hello James,

Unfortunately, this is not possible within CCA.

Thanks,

-john

View solution in original post

3 REPLIES 3
johschaf
Enthusiast

Hello James,

Unfortunately, this is not possible within CCA.

Thanks,

-john

View solution in original post

Thanks John,

I'm guessing I'll be stuck doing it with MOH Groups through the CLI.

Thanks again,

James

Hello James,

You can refer to this support forum post about MoH limits and such: https://supportforums.cisco.com/message/3086136#3086136

There is also a link in there to the CLI configuration, but I'll put that here in case anyone else stumbles across this post: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1022742

Thanks for the rating.

-john