cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
430
Views
0
Helpful
1
Replies

CISCO 7905G Not Loading Firmware

Netw00001
Level 1
Level 1

Hello,

 

I am wanting to change the 7905's I have over to SIP...

 

I have set up the TFTP server with the appropriate files:

 

CP7905010100SIP030807A.sbin

CP7905010100SIP030807A.zup

lddefault  (cfg file)

 

The TFTP Server Log shows as follows:

Connection received from 192.168.0.122 on port 14820 [22/09 23:28:38.647]
Read request for file <lddefault.cfg>. Mode octet [22/09 23:28:38.647]
Using local port 51571 [22/09 23:28:38.647]
<lddefault.cfg>: sent 1 blk, 66 bytes in 0 s. 0 blk resent [22/09 23:28:38.656]
Connection received from 192.168.0.122 on port 14821 [22/09 23:28:38.658]
Read request for file <CP7905010100SIP030807A.zup>. Mode octet [22/09 23:28:38.659]
Using local port 51572 [22/09 23:28:38.659]
<CP7905010100SIP030807A.zup>: sent 629 blks, 321622 bytes in 2 s. 0 blk resent [22/09 23:28:40.980]

 

The progress bar/percentage of the CP7905010100SIP030807A.zup file only ever gets to 80-90% before the phone resets its self. But as the Log States all of the 321622 bytes are sent (same as file size).

 

Then nothing changes on the phone just stays on the firmware below.

Current Phone Firmware:

App Load IDCP79050101SCCP030404A
Boot Load IDLD0100BOOT021112A
Software Version1.01(030404A)
Hardware Revision0x0004 0x0000

 

 

Any help would be much appreciated! Thanks in advance. 

1 Reply 1

aleccham
Cisco Employee
Cisco Employee

Hello Netw00001, 

 

I believe you may be experiencing a version control issue, can you please double check to make sure that you are using the most up to date IOS and CME versions to ensure there aren't any incompatibilities. 

 

Another avenue to explore, is ensure that your IP phone is receiving the proper NTP information from the server, if after your apply your new .cfg file and run the command 

sh ntp sta

If you see any output pertaining to failing to sync with the NTP server, then your issue lies there. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: