cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1270
Views
0
Helpful
1
Replies
tristandean
Beginner

Cisco SPA303 hot line support

Hi Guys

We are wanting to configure a pair of Cisco SPA303s to support hot line functionality. I.E. When the phone goes offhook, it immediately dials a particular number without the user having to press any buttons. We are using SIP as the signalling protocol.

According to the datasheet, this is possible (perhaps only for SCCP though?):

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10998/data_sheet_c78-601648.pdf

However, I can't figure out how to do it. I have scoured the phone and web interface options and can't find anything. I have also checked the XML configuration template for the SPA30X and 50X phones. I can't figure out which option allows me to do this.

Has anyone else done this before? Would they mind sharing how they did it?

I have tried searching these forums and Google to no avail. If I've missed something, please point me in the right direction.

Thanks a ton!

1 REPLY 1
abrenes26
Beginner

Hi,

Go to the web page of the phone. Each line under the SPA has a Dial-Plan option. You just need to paste the next code in order to do the PLAR (HotLine).

(P1<:extesion> | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)

PX=Pause for X second.

extension= where you want to auto dial.

In my case

(P1<:2002> | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)

the phone automatically call to extension 2002