Cisco SPA525G2 no admin assess in gui

[mutimafc1]

I have this phone spa525G2 at first i was able  to access the web gui but i could not change any configuration when ever i could go to admin login it was requesting for user name and password which i did not have  so i decided to do a reset on startup now i don't have the admin login

[balaji.bandi]

check some setting GUI enabled or not :

https://www.cisco.com/c/en/us/support/docs/smb/unified-communications/cisco-small-business-spa500-series-ip-phones/smb2155-enable-disable-web-interface-on-spa525g-or-spa525g2-ip-phone.html

You can reset to factory if you like to :

https://www.cisco.com/c/en/us/support/docs/smb/unified-communications/cisco-small-business-spa500-series-ip-phones/smb2157-factory-reset-on-the-spa525g-and-spa525g2-ip-phones.html

[mutimafc1]

Maybe you did not get my problem very well I said I can access the gui but when I go to advanced to try and make changes it dies not give me the right in fact it does not give me space to make changes As attached

[balaji.bandi]

If this wsa setup  with admin aceess you need admin/password  to change config, if you dont have credentials, you need to reset, make sure you put password save it securly.

I do not have any device to test, it was used long back. try reset password.

[mutimafc1]

I tried all the reset but nothing worked