cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Announcement“Cisco Design Thinking Workshop”. Cisco Small Business is excited to invite its Silicon Valley customers to an exclusive interactive one-day session between customers and product Managers.  If you are interested in this exclusive workshop, please fill out the Registration Form. For more information, please check out our FAQ


Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

1448
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco SPA5xxx Syslog Error on Boot: SCCPTCP:ERR:Can't Bind to...errno=49

When all of my Cisco 509g phones boot, they generate a syslog error message (see below) that says SCCPTCP:ERR:Can't bind to c0a801d0:5060 errno=49.

Local0.Info <IP Address> SCCPTCP:ERR:Can't bind to c0a801d0:5060 errno=49

The immediate message after that one is shown below:

02-06-2011 13:17:29 Local0.Info <IP Address> [0]Reg Addr Change(0) 0:0->c0a80164:5060

Note: The numbers in italics change for each phone. I am not sure what these numbers refer to.

Everything works OK, but I am concerned about the error messages.

Everyone's tags (4)
1 REPLY 1
Cisco Employee

Re: Cisco SPA5xxx Syslog Error on Boot: SCCPTCP:ERR:Can't Bind t

Alleycatcomp

Italics refers to each IPPhone ip address in hexadecimal format in this case c0a801d0=192.168.1.208 and c0a80164=192.168.1.100

Regards

Rogelio V.