Hello
I have a client with Cisco UCS 540 telephone system and i am unable to get the URL services and authentication pages to work. the following is the current config of the device.
#sh ip int bri
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES NVRAM administratively down down
In0/0 10.0.1.253 YES TFTP up up
FastEthernet0/1/0 unassigned YES unset up up
FastEthernet0/1/1 unassigned YES unset up up
FastEthernet0/1/2 unassigned YES unset up up
FastEthernet0/1/3 unassigned YES unset up down
FastEthernet0/1/4 unassigned YES unset up up
FastEthernet0/1/5 unassigned YES unset up up
FastEthernet0/1/6 unassigned YES unset up up
FastEthernet0/1/7 unassigned YES unset up up
FastEthernet0/1/8 unassigned YES unset up down
Serial0/2/0:0 unassigned YES unset down down
Serial0/2/0:1 unassigned YES unset down down
Serial0/2/0:2 unassigned YES unset down down
Serial0/2/0:3 unassigned YES unset down down
Serial0/2/0:4 unassigned YES unset down down
Serial0/2/0:5 unassigned YES unset down down
Serial0/2/0:6 unassigned YES unset down down
Serial0/2/0:7 unassigned YES unset down down
Serial0/2/0:8 unassigned YES unset down down
Serial0/2/0:9 unassigned YES unset down down
Serial0/2/0:10 unassigned YES unset down down
Serial0/2/0:11 unassigned YES unset down down
Serial0/2/0:12 unassigned YES unset down down
Serial0/2/0:13 unassigned YES unset down down
Serial0/2/0:14 unassigned YES unset up up
Serial0/2/0:15 unassigned YES NVRAM up up
Dot11Radio0/5/0 unassigned YES NVRAM administratively down down
Vlan1 unassigned YES NVRAM up up
Vlan2 unassigned YES NVRAM up up
BVI1 10.0.0.250 YES NVRAM up up
BVI2 10.0.1.253 YES NVRAM up up
UC540#sh run | inc url
url services
http://10.0.1.252/voiceview/common/login.do
url authentication
http://10.0.1.253/CCMCIP/authenticate.asp
UC540#
when I try to access the above URL from Internet explorer i just get page cannot be displayed.
Any help on this would be really appritiated.
many thanks
Upen Desai