I have two SPA8000, in the CCA one of then is recognized by the systema and I can configure the extensions users, etc., but the other one is not possible to add, the button to add another FXS Gateway it's just disable.
If I go to the topology view in the CCA is possible to see both devices, but it's not possilbe to add with the seconf one, Is there a way to do this in CCA or CLI?
SPA8000: S.Ver. 6.1.12
CCA 3.2.2
Software pack 8.6.1
CME: 8.6
CUE: 8.6.5
