cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1261
Views
0
Helpful
0
Replies

Connect UC500 to PBX legacy via ISDN gateway

Arturo Bianchi
Level 1
Level 1

Hi Folks,

I'm trying to finalize the configuration of a UC540 connected via VPN to a remote PBX...

schema.jpg

The VPN circuit terminates on a Cisco ASA 5510 and Legacy PBX have 2 ISDN port connected to a Patton SN4554 gw; now, I want to find the best configuration, avoiding if possible any problems with CCA!!! Indeed, already for the VPN I have worked with the CLI :-(

I have not checked whether I can work on gw as a server and connect the UC500 with a sip trunk or if I have to follow another path; however, ultimately I would like some advice, ideas, configuration to simplify things and to work the UC500 as a satellite of the legacy PBX. The essential goals are to divert some external calls to the remote site and manage the possible transfers / calls between offices.

There would be several things to add but for now I will stop here!

Thanks.

73,

Arturo

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: